- These connectors are intended as a simple and inexpensive method of making cable to printed circuit board connections
- The pins are at standard 0.1inch (2.54mm) pitch
These header plugs are designed primarily for accepting the matching sockets below allowing cables to be plugged on to circuit boards or circuit boards to be plugged together. The pins protrude 3.4mm from the base and require 1mm diameter holes for soldering to the PCB. The pins are 7.5mm long above the base and the header features a locking and polarising clip. Both plugs and sockets may be butted up end-to-end to form connectors with any number of ways from two upwards. Rated: 2.5A, AC 250 V.
Technical Specification
| | |
| Type: | Length (mm):
|
| 2-way | 3.5
|
| 3-way | 7
|
| 4-way | 9.5
|
| 10-way | 24.5
|
|
|
Frequently Asked Questions
Q- Will this PCB plug fit in the holes already punched in a stripboard, ie. 2.54mm pitch.
- Pete
Answer- Yes the product does support that.
Q- How should wires be connected to the sockets? Is there a tool? What are minimum and maximum wire gauge?
- Dan Sanders
Answer- This is PCB mount.
Q- Will this PCB plug fit in the holes already punched in a stripboard, ie. 2.54mm pitch.
- Pete
Answer- Yes the product does support that.
Q- Hi
Do the 0.1” Series Straight Plug PCB Header come with the pins ?
- Gary
Answer- yes it does
Q- Do you sell these pins and a tool to crimp them?
- Antony
Answer- No sorry these are not stocked by ourselves.
Q- can't find the matching socket to YW11M plug in your catalogue, local store assistant thinks thay are no longer stocked by you, is this correct?
- a wellings
Answer- Try HB58
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
0.1Inch Series Straight Plug PCB Header
also searched for:
0.1 Series Straight Plug PCB Header - Series Straight Plug -