- A range of toggle switches in SPDT and DPDT with a variety of switching actions
- Switches have chrome-plated brass dolly and silver-plated contacts
A range of toggle switches in SPDT and DPDT with a variety of switching actions. Switches have chrome- plated brass dolly and silver-plated contacts.
Technical Specification
| | |
| Rated: | 2A | AC 250V
|
| 5A | AC 125V
|
| 5A | DC 30V
|
| Contact resistance: | <20MΩ
|
| Insulation resistance: | >100MΩ
|
| Life: | 50,000 make/break cycles | at full load
|
| Mounting hole: | 6.35mm (dia.)
|
| Single-pole double-throw (SPDT) types are available in the following switching actions.
|
| (Non-locking indicates biased or momentary action)
|
| Type | Action | Description
|
| A | ON-ON | Locking, both ways
|
| B | ON-OFF-ON | Locking both, ways, centre off
|
| C | ON-OFF-(ON) | Locking one way, non-locking one way, centre off
|
| D | (ON)-OFF-(ON) | Non-locking both ways, centre off
|
| Double-pole double-throw (DPDT) types are available in the following switching actions.
|
| Type | Action | Description
|
| E | ON-ON | Locking both ways
|
| K | ON-(ON) | Locking one way, non-locking one way
|
| F | ON-OFF-ON | Locking both ways, centre off
|
| G | ON-OFF-(ON) | Locking one way, non-locking one way, centre off
|
| H | (ON)-OFF-(ON) | Non-locking both ways, centre off
|
|
|
Frequently Asked Questions
Q- What are the dimensions of the Sub-Min Toggle A switch?
- Marcus Richards
Answer- Body 8 x 9 x 7mm, Bush length 5.6mm, Dolly length 9.5mm, Tag Length 5mm
Q- It could realy do with listing the info for the double pole switches otherwise how do we know what they are? Also the info for the single pole switches is poorly formated, it could do with some spaces as "AOn-OnLocking" is bit dificult to read.
- chris
Answer- A request for the information to be posted has been passed to the Internet team.
Q- Would these switches be suitable to fit to a domestic wall light (240vac) fitted with up to a 40w bulb?
- John Christian
Answer- No sorry this product does not support that.
Q- What size of faston or female push on terminal do these take or are they solder lugs
Thanks
- Mark
Answer- These are solder lugs.
Q- What diameter hole for mounting?
- Simon
Answer- 6.35mm as stated in product desciption
Q- I am looking to fit a Sub-Min toggle to my rc boat. the Switch is place between the receiver and the battery pack which is a 1.2V - 1400mAh.
Can you advise me of the type of toggle required.
thanking you in advance
J-S
- Jean-Sebastien
Answer- Any of our Toggle Switches will be fine.
Q- Please, what are dimensions of Sub-Min Toggle E (FH04E)
- Christopher
Answer- 33.8mm high, 13.2mm wide, 12.7mm deep
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
Sub-Miniature Toggle Switches
also searched for:
DPDT Toggle Switches - SPDT Toggle Switches - SPDT/DPDT Toggle Switches - Sub - Miniature Toggle Switches - Toggle Switches -