For intermittent operation of circuits and equipment. Blinking light, video/photo single frame shooting, slide projector control, miniature models
Technical Specification
Technical specifications:
5A output relay with dry switch-over contact
Pulse time adjustable between 0.5 and 5s
Pause time adjustable between 2.5 and 60s
Power supply: 12Vdc/100mA
Frequently Asked Questions
Q- I need an interval timer to control a small bilge pump in a model boat, for which I am planning to use a car windscreen washer pump. The power supply is 6v. The pump runs happily at the reduced voltage. Will the timer work? I am not worried if the intervals are shorter/longer/less accurate I'm happy to fiddle with that. I just need to know if it will work at all at the reduced voltage.
Thanks.
John Davies
- John Davies
Answer- No sorry this product does not support that.
Q- can the timer be used as a delay on, eg energise with 12 vdc then activates after say 15 seconds ?
- richard
Answer- No sorry this product does not support that.
Q- I'm looking for something to switch on a 12v bulb when current is applied and switch the bulb off after a few seconds with the 12v feed still being applied. Will this item do this?
- Colin Tremble
Answer- No sorry this product does not support that.
Q- Hi, Can I use a press-ON switch to create the pulse, between 0.5 and 1.5 sec, to activate the timer relay. And, can the relay switch ON a 230 volt 40 watt lamp for 20 sec. Thank you. Randolph.
- Randolph
Answer- No sorry this product does not support that.
Q- Would this be able to receive a signal (volt free switch) to break an output (12Vdc) for a time of around 6 seconds?
- L A Doors
Answer- No sorry this product does not support that.
Q- Hi
Does this component come complete, or is it kit form that requires building onto the board with solder joints etc.
- Mark Walter
Answer- #This is a Kit, and will require construction.
Q- Hi there can this relay be used power up a car heated seat for example 10 minutes then time off at the press of a push to make button. thanks
- Peter Chapman
Answer- No sorry this product does not support that.
Q- Can I use this kit to delay power up of my car radio for 30 seconds when i swith the ignition on?
- Steve Beard
Answer- Yes the product does support that.
Q- cam i fit an 8 amp relay to this circuit for my cool box
many thanks
philippe
- Philippe audoire
Answer- Yes the product does support that.
Q- What voltages can the relay handle on the ciruit that''s switched on?
- John Smyth
Answer- 5A output relay
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
MK111 Adjustable Timer
with Relay Output
also searched for:
Adjustable Timer with Relay Output - MK111 Adjustable circuit Timer with Relay Output - MK111 Adjustable Timer with Relay Output - MK111 Adjustable Timer -