- A lead-free alloy solder that is better for the environment
- Contains non-corrosive flux
- Contains 99.3% tin and 0.7% copper
- Available in 1mm 100g, 250g and 500g reels and a 2m tube
Frequently Asked Questions
Q- Is this solder alright to use for guitar electronics? (e.g. soldering pickup wires to the pots)
- Chris
Answer- yes it is fine for that purpose
Q- Is this suitable for soldering silver plated wire?
- Jake Thomas
Answer- No use silver solder for this.
Q- What is the flux material in this solder (ie - is it a rosin based flux)?
- George
Answer- here is the datasheet (i hope this helps) http://www.shenmao.com/files/spec/PF604-R(TDS).pdf
Q- is this ok to use on soldering dc jack on a laptop?
regards
billy
- billy
Answer- Yes the product does support that.
Q- What is the melting point of this solder? Do you require a hotter soldering iron ?
- Clive
Answer- The melting point of Tin/Copper solder is 227 degrees centigrade.
Q- is this ok to use on soldering dc jack on a laptop?
regards
billy
- billy
Answer- Yes the product does support that.
Q- Will this solder Aluminium to steel?
- J Thorne
Answer- No sorry this product does not support that.
Q- What are the likely problems of re-soldering a joint that was made with the
traditional solder using the new mix ?
-
Answer- None, should be no problems.
Q- is 30w high enough to melt this
- scott
Answer- Yes, that should be fine.
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
Lead-Free Solder
also searched for:
alloy solder - lead free alloy solder - Lead Free Solder - lead free solder with non - corrosive flux - solder - solder for guitar electronics -