- Remove unwanted noise from your audio system
- Simple installation
- Very effective
A low level filter to isolate the ground between the car stereo and amplifier, to prevent car ignition noise and earth-loop hums.
Technical Specification
| | |
| Specifications:
|
| Distortion: | >0.001%
|
| Frequency response: | 40Hz-32Hz
|
| Input/Output impedance: | 10kΩ
|
|
|
Frequently Asked Questions
Q- ok thanks, also where does it go? my amp has 4 RCA leads going into it but these are 2 split into 4. im guessing it connects between the 2 RCA connectors just before its split and connected to the input of the amp?
- Daryl
Answer- Correct yes.
Q- We have a cctv system with a pre-amped microphone using a 9v dc adapter, when in use we are getting an earth loop hum, when we use a 9v pp3 battery the hum disappears would this device remove the hum when using the dc adapter?
Thanks in advance
- Steve Dixon
Answer- Yes the product does support that.
Q- would i put this between mixer and amp?
- John
Answer- Yes the product does support that.
Q- Hi, can this be used in an A/V setup between the sub and the receiver?
- a boothroyd
Answer- Yes the product does support that.
Q- there is an annoying buzz from the laptop through my mixer, will this help towards removing that annoying sound?
- D Wood
Answer- Yes the product does support that.
Q- I have a ground loop problem in my hifi.
Will this help or does it only work in cars.
Will this unit affect the sound quality at all?
- Peter Scowcroft
Answer- Yes this will work fine for home use. Sound quality will deteriorate a little, but this shouldnt be noticable.
Q- Can I use the ground loop isolator in a recording studio set up? It seems to be aimed at cars but I want to know if it adversely effects sound quality as well as reducing the hum. The ground loop is caused by a TFT flat screen in combination with a p
- Ed
Answer- The ground loop isolator is suitable for studio work over short runs of cable, longer cable lengths may introduce larger amounts of RF noise - depending upon the environment it is placed in.
Q- i get a loud hum when i plug my cable from the headphone socket of my ibm thinkpad laptop into my dynacord powermate mixer/amplifier, whether I''m using mains power or battery power for my laptop will the gound loop isolator solve this problem or is it a dc problem, thanks
- steve jones
Answer- Possibly also the use of ferrite beads may help.
Q- Can you tell me what the impedance is of the isolator?
- Carl Curtis
Answer- 10k Ohms
Q- I have a DVD player in my car which is playing through a FM modulator, the noise from the motor inside the DVD player causes a noise on the speakers would the ground loop isolator remove this. Thanks
- AD:
Answer- It should do yes.
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
Ground Loop Isolator
also searched for:
Ground Loop car Isolator - Ground Loop Isolator - in car Ground Loop Isolator - low level filter Isolator -