- Connect multiple 3-pin fans to one 4-pin connector from the PSU
- Can also be used to reduce fan speed and noise
This clever cable solves two problems in one. At its simplest level, the cable allows you to connect multiple 3-pin fans (or Fan Mates) to one 4-pin connector from the PSU. This is useful where you wish to install one or more 3-pin fans but there are no available 3-pin fan header sockets available on the motherboard.
In addition, it gives you a choice of two operating speeds for your fan(s), by allowing you to run your 12 volt fan(s) at 5 volts if desired. This has the effect of slightly reducing the speed of the fan, and significantly reducing the noise. Although the airflow will be reduced, this rarely has a large effect on case temperature.
Frequently Asked Questions
Q- Can this take 2 pin fans? I can't tell from the picture, if not, do you sell some sort of adapter for 2 pin fans to molex or 3 pin?
-
Answer- The connectors are all 3 pin as on motherboards but without the speed sensor cable
Q- This can be used for four fans
- Jabar Shah
Answer- yes that is correct
Q- i have bought one of these recently, comes with two black and two white. which colour runs at which voltage??
- david
Answer- White is 5 volt Black is 12 volt
Q- What method can I use to change the voltage from 12V to 5V?
- Alan Playford
Answer- There is a small dial on the module.
Q- How can i tell which Volt the fan uses?
- Craig
Answer- The back of he fan will have a sticker on it which will say the voltage. Generally all PC fans use 12V.
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
Fan Multi-Connector Cable
also searched for:
4 pin connector cable - connector cable - Fan Multi - Connector Cable ZM - MC1 - psu 4 pin connector cable - psu connector cable - zm - mc1 - zm - mc1 connector cable -