- Built-in rechargeable battery pack for powering LNB
- Rigid metal cabinet for field use
- Carrying case
- 13/18V power with LED indicator
- 22kHz signal generator for test of high band frequency
- 22kHz signal LED indicator
- LNB voltage measurement up to 25V DC, voltmeter
- LNB Current measurement up to 500 mA, ammeter
- Buzzer for acoustic signal strength monitoring with on/off switch
- Frequency range 900 - 2,150 MHz
- Highest input sensitivity and accuracy through advanced technology
- Active 2 stage power amplifier 28dB
- Built-in integrator for broad band frequency scanning
- Easy measurement with logarithmic regulated RF amplifier
- Automatic recharging and regulating circuit built in, shortcut protected
- Automatic charging when connected SRX
- Designed in Germany for best performance
- Cabinet size: 150 x 125 x 57mm
- Weight: 900g including rechargeable batteries
- DC input: 20V/60mA regulated
- Frequency range: 900 - 2,150 MHz
Technical Specification
Frequency range: 900 to 2,150 MHz
Impedance: 75 ohms
Power amplifier: 28 dB
Max. input signal: -10dBm
Detection range: -45 to -12dBm
Indication: analogue panel meter, 100u f.s.d. 2.5%
Signal monitoring: buzzer sound
Connector: F-female type
DC Volt: 0 to 25V, 2.5%
DC current: 0 to 500mA, 2.5%
Battery pack: Ni Cad 18V / 500mA
Download Centre -
Technical, Firmware and Information
Frequently Asked Questions
Q- I live in the Alicante area of Spain and receive Sky transmissions on a 2.4 metre dish. Will this meter pinpoint the exact direction for my dish to point to maximise my signal?
- Mike Heppolette
Answer- Yes it will.
Q- Could this help me make fine adjustments needed for dish alignement
- Andy Jones
Answer- Yes the product does support that.
Q- Can you tell which satellite you are pointing at?
- D King
Answer- Unfortunately you cannot.
Q- Is this meter suitable for testing the signal strength on frequencies used by Sky?
- John Morren
Answer- Yes the product does support that.
Q- i am settin out as a satellite fitter would you say this is ample to do the job
- chris
Answer- Yes the product would be a very good starting point.
Q- Can this meter be used for terestial digital services
- C Horton
Answer- i am afraid not
Q- Does the A98FG satellite meter include a separate charger?
- Colin
Answer- This is not included
Q- Will this measure the signal received by a dish to allow me to pinpoint the dish posistion?
- Nick
Answer- Yes the product does support that.
Q- Are there any extra leads requried to use this finder.
- Elaine Eire
Answer- assuming you have a cable runing from your LNB currently no you should not require further leads
Q- Will this Field Strength meter (Handheld Portable Satellite Signal Strength Meter) be suitable for measuring the field strength from a standard mobile phone?
- Mike Ayers
Answer- No sorry this product does not support that.
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
Handheld Portable Satellite Signal Strength Meter
also searched for:
Handheld Portable Satellite Signal Strength Meter - handheld signal strength meter - handheld signal strength metre - portale signal strength meter - potable signal strength metre - signal strength meter - signal strength metre -