- DC 0 - 30V (2.5A), fixed DC 5 and 12V (0.5A) outputs
- Separate analogue voltmeter and ammeter
- Current can be limited from 0 to 2.5A using the ‘current’ control.
- Fixed outputs through ‘snap-on’ terminals and variable supply available at pair of terminal posts
- Overload and short circuit protected
A cost-effective quality power supply, in a strong galvanized steel case, with two fixed outputs and a 0 to 30Vdc output up to 2.5A max. The fixed outputs are of 5 and 12Vdc, each with a 0.5A max. rating. Overload and short circuit protection is provided. A separate analogue voltmeter and ammeter display the output settings for the adjustable supply, the voltmeter reading 0 to 30V and the ammeter reading 0 to 2.5A. The output voltage is continuously variable over the range using the ‘voltage’ control, whilst the current can be limited from 0 to 2.5A using the ‘current’ control. The two fixed outputs are fed out through ‘snap-on’ terminals and the variable supply is available at a pair of terminal posts. The various terminals are marked ‘+’ and ‘-’ and coloured red and black respectively.
Technical Specification
| | |
| Specifications:
|
| Input Voltage: | AC 240V, 50Hz
|
| Input Power Plug: | UK 3 Pin Mains Plug
|
| Input Power Cord Length | 1.7m
|
| Output Voltage: | DC 0 - 30V (2.5A max)
|
| DC 5V (0.5A max)
|
| DC 12V (0.5A max)
|
| Ripple & noise: | 5mV
|
| Line regulation: | 0.05% + 10mV
|
| Load regulation: | 0.05% + 10mV
|
| Output Current: | 2.5A (2500mA)
|
| Output Voltage Type: | Variable
|
| Output Power (Max): | 75W
|
| Regulated Output: | Yes
|
| Reversible Polarity: | No
|
| Number of Output Sockets: | 3
|
| Output Tips/Socket Type: | Terminal Post / 4mm Socket
|
| Efficiency: | 60%
|
| Dimensions: | 150(l) x 130(w) x 225(d) mm
|
| Weight: | 5250g
|
|
|
Bulk Prices
Quantity Price including VAT :
1
£69.99
5
£52.84
10
£49.91
25
£46.97
100
£44.03
Frequently Asked Questions
Q- Are all three outputs available simultaneously?
- Colin
Answer- Yes the product does support that.
Q- Can I connect the negative terminals of the three outputs together, so that all three outputs share a common negative rail?
- bob
Answer- No sorry this product does not support that.
Q- Is the 0 - 30v dc output regulated
- Bob
Answer- Yes that is correct
Q- can it be adjusted for mAmps
- Donald
Answer- Yes it can
Q- Could this be used to power a CB rado?
- Richy
Answer- Assuming it meets the CB radios specific power requirments such as voltage and amperage then yes
Q- will this unit run a car head unit plus two amps for sub's ? thanks
- g mcleod
Answer- No sorry this product does not support that.
Q- Can I use this to charge or keep power running on mobile phone?
- kpowell
Answer- Yes the product should support that.
Q- Are the 5V and 12V outputs voltage regulated and current limit protected?
- Kerry Green
Answer- Unfortunately not.
Q- can iuse suppose two equipment requierd 12v/1amp and two equipment requierd 12v/2amp simelteniously
- sunil kumar rana
Answer- No sorry this product does not support that.
Q- Can I use this as a dual power rail suppy, eg +12v, 0v, -12v?
- David
Answer- no sorry.
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
Triple Power Supply
also searched for:
Bench Power Supply - Bench Supply - Power Supply - Steel Cased Power Supply - Triple Power Supply -