- Convert your wired CCTV camera into a wireless system
- Transmit video signal by 2.4GHz frequency band
- Wireless BNC connector plug
- 4 channels available to avoid interference
- Built-in microphone for audio monitoring
- 100m transmission distance without block
- Suitable for CCTV camera and other video devices
If you have an existing wired CCTV system or want to add another camera, this wireless convertor is the easiest way to add up to 100 metres’ distance between your camera and monitor without having to run cables.
The wireless convertor attaches to the camera’s existing BNC connector to enable it to transmit video and audio via the 2.4GHz frequency. It is supplied with a transmitter and receiver, power supply and connecting cables.
Technical Specification
| | |
| Technical specifications:
|
| Receiving frequency: | ISM 2,400 - 2,483MHz
|
| Intermediate frequency: | 480MHz
|
| Frequency stabilisation: | ±100kHz
|
| Demodulation mode: | FM
|
| Antenna: | 50&ohm ; (SMA)
|
| Local leakage at input terminal: | <55dBm
|
| Receiving sensitivity: | <85dBm
|
| Video output: | 1Vp-p@75Ω / S/N>38dB
|
| Audio output: | 1Vp-p@600Ω
|
| Power supply: | DC 12 V
|
| Power consumption: | 250mA
|
| Operating temperature: | -10°C - +50 °C
|
| Storage temperature: | -40°C - +85°C
|
| Operating humidity: | 85%RH
|
| Dimensions: | 92(w) x 78(l) x 23(h) mm
|
| Weight: | 200g
|
|
|
Customer Reviews on this Product
Ronald
(24/09/2009)
The item is not waterproof so is no good for outside use.Also you still of course have to supply it with 12volt DC, so you might just as well hard wire your existing camera.
Frequently Asked Questions
Q- will this work with wired swann securaview . i want to make it wireless if poss
- sarah
Answer- it works with any camera that uses a bnc connction.
Q- if i put this on my wired cctv camera thats 0.005 lux will i get the same picture as i do now or will the picture degrade
- m brown
Answer- There should be no degregradion, unless there is interferance.
Q- how many hours of recording can this camra do ?
it a spy camra ?
would any one relase that the camra is there?
- nisha
Answer- This is not a camera. This is a kit for converting a wired camera to a wireless one.
Q- are the Red/Yellow sockets A/V out
- Izzy
Answer- yes that is correct
Q- Can you set the frequency to avoid interference from other nearby devices?
Also, does the unit have to line of sight or will it work between floors for examples?
- Jason
Answer- It has 4 selectable channels to avoid interference, line of site is not required.
Q- I have 3 swann wireless cameras linked to one 2.4GHZ switchable reciever. Could I buy 2 of these and use them to connect it to a dvr recorder like item n01fu using bnc-phono adaptor so all 3 cams record at once? Thanks - Ferg
- Fergus
Answer- Yes the product does support that.
Q- Can the transmitter be battery powered
- glen
Answer- No sorry this product does not support that.
Q- hi,
how many cameras can you use with this receiver?
thanks
- paul
Answer- 1 camera per reciever
Q- I already have a wireless camera system however the reciever is slightly out of range...can this product be used as a go-between to extend the range of my camera?
-
Answer- No it can not.
Q- Does the transmitter use the same supply that my camera uses?
- Russell Tribe
Answer- Yes, it connects in-line with you're cameras supply.
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
Wireless Colour CCTV Camera Convertor
also searched for:
CCTV Camera Convertor - Wireless CCTV - Wireless CCTV Convertor -