A flashing LED in a
mounting bezel designed to be mounted in the dashboard to indicate that an alarm is installed (even if no alarm is installed!) Fitted with 1.5m lead. Operates on 12Vdc and draws 10mA.
Frequently Asked Questions
Q- How can i make this led flash when ignition is off but not when its on?
- Martin Williams
Answer- Connect the negative side of the led to a ground in the car and the positive side to pin 87a on an automotive relay, then connect pin 85 to a ground in the car and pin 86 to the accessory wire.
Q- Would this fit to a Wired doorbell, thus giving LED visable indication to a deaf person.
- Andrew "Leeds"
Answer- Yes, but there may me extensive modification.
Q- is an in-line fuse required?
- Trevor
Answer- yes we would advise to use an inline fuse
Q- Is the LED wired directly to the car battery or the ciggarette lighter?
- R Tracey
Answer- ideally connected direct to battery
Q- What size is the mounting bezel? and will thiswork with an aftermarket alarm (ie clifford alarm)?
- BA
Answer- aprox 8mm it does not require an alarm to work.
Q- Hi what size battery do i need to power this in my dummy alarm box and do you sell them
- geoff
Answer- This Operates on 12Vdc and draws 10mA
Q- Whats the likelyhood of it handling 230volts?
- Danny
Answer- As per overview: Operates on 12Vdc and draws 10mA.
Q- Is this flashing LED waterproof?
- John
Answer- No sorry this product does not support that.
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
Security Flashing LED
also searched for:
dashboard Security LED - Flashing LED - Flashing Security LED - LED - Security Flashing LED - Security LED -