View our Op-Amps, Semiconductors, Components range at maplin.co.uk - buy online, by phone or click & collect, ready within 20 minutes. Google+

Tracking information for this order:

Wait

If you are an account holder, please log in and visit the order history page for more information.

I have an account »

Filter By Price

loading

££apply

Filter By Status

loading

REORDER

loading


per page

loading

TL071CN, TL072CN & TL074CN

RA68Y

TL071CN, TL072CN & TL074CN

A range of high speed JFET input operational amplifiers incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. TL07x series are designed as low-noise versions of the TL08x series with low input bias and offset currents and fast slew rates. TL071 is an 8-pin DIL package containing one amplifier, TL072 is an 8-pin DIL package containing two individual amplifiers and TL074 is a 14-pin DIL package with four individual amplifiers.

from £0.59

TL081CN, TL082CN & TL084CN

RA72P

TL081CN, TL082CN & TL084CN

A low-cost general purpose range of JFET op-amps featuring high slew rates, low distortion, low input bias and offset currents, and low offset voltage temperature coefficient. Each device features a well-matched, high voltage JFET and bi-polar transistors in a monolithic IC package. TL081CN is supplied in an 8-pin DIL package, as is the dual version TL082CN TL084CN is a quad version in a 14-pin DIL package.

from £0.59

LM358N

Independent high-gain internally frequency compensated op-amps designed specifically to operate from a single power supply. The output voltage can swing to ground even on single rail power supplies. Channel separation 120dB.

In stock

only £0.99

TS358

• Short circuit protected outputs • True differential input stage • Low input bias currents • Internally compensated • Common mode range extends to negative supply • Single and split supply operation

from £0.49

LM741CN

The LM741 is a general purpose operational amplifier which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439 and 748 in most applications. The amplifiers offer many features which make their application nearly foolproof: overload protection on the input and output, no latch-up when the common mode range is exceeded, as well as freedom from oscillations.

In stock

only £0.99

LM3900N

• 4 dual input, internally compensated amplifiers designed primarily for single power rail operation • Current differencing amplifiers use a current mirror to achieve the non-inverting function

In stock

only £0.89

NE5532N

A dual op-amp designed for use in high quality and professional audio equipment. The IC has a typical input noise voltage at 1kHz of 5nV/vHz. In addition it has better output drive capabilities and much higher small signal and power bandwidths than most other dual op-amps, yet is a direct pin-for-pin replacement for a 1458.

In stock

only £0.99

NE5534AN

A high performance, low noise op-amp especially suited for professional and high quality audio equipment, as well as instrumentation and control circuits, and telephone channel amplifiers. Compared to standard 741/TL081 op-amps, the device offers better noise figures, improved output drive capability and considerably higher small signal and power bandwidths. The op-amp is internally compensated and the frequency response can be optimised with an external compensation capacitor to suit specific a

In stock

only £1.46

LM13700N

The 13700 is a dual operational transconductance amplifier with linearising diodes and buffers. It consists of two current controlled transconductance amplifiers, each with different inputs and a push pull output. The two amplifiers share common supplies, but otherwise operate independently. Linearising diodes are provided at the inputs to reduce distortion and allow higher input levels. The result is a 10dB signal-to-noise improvement referenced to 0.5% THD. High impedance buffers are provided

Web site only

only £2.10

CA3140EZ

A MOSFET input, bipolar output op-amp that will directly replace the 741 in most applications. It will operate from single or dual supply rails and input terminals can be swung up to 0.5V below negative rail. Internally compensated. Max input terminal current is 1mA. The output can be strobed. Supplied in an 8-pin DIL package. N35CH is RoHS compliant

In stock

only £2.69

LF347N

Low-cost high performance JFET input op-amp that will directly replace and out-perform the 741 in most applications. The device is low noise, has distortion figures of less than 0.02% over the audio band, high slew rate (13V/µs), high input impedance (1012Ω) and wide bandwidth. The 347, internal amplifier isolation is 120dB. Additionally, the accurately matched JFET inputs provide very low input bias and offset currents. It is most important that input voltages never go more negative

In stock

only £1.29

Error

Sorry, there was a problem.

An error occurred when processing your request.

Please try again.

close »