- Tie-clip belt pack radio microphone system offering superior performance
- Ideal for schools, small clubs and pubs, in fact anywhere a wireless microphone may be required
- UHF signal gives increased signal quality and range
- Can be used with electric guitar or bass to make a wire-free environment
- User-definable 16-channel UHF microphone system, run up to 4 mics at the same time (4 full kits would be required)
- Can run alongside other VHF systems due to differing frequencies
- Low battery consumption
- Belt pack transmitter is designed for use with a headset, lavaliere tie-clip microphone, instrument (guitar etc.) or male XLR cable
- Auto switching is incorporated to accept either instrument or microphone inputs when used with the adaptor cables
- Transmitter runs on 2xAA batteries (Order code: L43AL)
- Low-drain circuitry gives the transmitter extended operating life
- On/off switch to save battery power
- Volume control for microphone on the receiver
- Balanced XLR, unbalanced jack outputs and variable squelch control
- Can be plugged into an amplifier, mixer or any device that accepts mic level audio inputs
- Adjustable antenna on receiver for improved reception and range
- Up to 75 metre line-of-sight range
- Receiver runs from DC16V, 300mA
- RF test function
- Complies with DTI regulations and are totally license-free
- Operates between 863.00MHz to 865.00MHz in 16 steps
- Supplied with beltpack transmitter, receiver, tie clip mic, headset mic, belt pack instrument cable, connecting leads, power supply and full instructions
Please Note: Picture is for illustration purposes only
A concealed control plate houses the channel selector switch and gain controls for the instrument and microphone levels.
The front panel features power on/off switch with indicator LED, RF signal strength indicator, signal acquisition indicator, RF signal strength indicator, channel selector and audio level output.
The transmitter pack is also suitable for use with dynamic condenser or phantom-powered microphones.
Please note:
This kit is capable of running only one microphone at a time. If you want to run 4 microphones at the same time then 4 full kits (mic and receiver) would be required.
Technical Specification
| | |
| Transmission frequency: | 863.00 - 865.00MHz
|
| Frequency stabilisation: | <±30ppm
|
| Dynamic range: | >90dB
|
| Harmonic distortion: | <0.5%
|
| Frequency response: | 40Hz - 15kHz (±3dB)
|
| Transmitter power: | 8.5mV
|
| Max battery life: | 6 hours''
|
| S/N ratio: | >90dB
|
|
|
Download Centre -
Technical, Firmware and Information
Bulk Prices
Quantity Price including VAT :
1
£139.99
5
£134.99
10
£129.99
Frequently Asked Questions
Q- What is the range between transmitter and receiver?
- mark
Answer- aprox up to 100m dependent upon conditions (i.e. line of site, surrounding interference etc)
Q- What are the outputs on the reciver
- Brinky
Answer- Balanced output on XLR and unbalanced output on 1/4" (6.35mm) jack socket.
Q- can receiver be battery powered ?
- maud
Answer- i am afraid not
Q- Your catologue list this as coming with a headset mike too, is that true?
- John
Answer- Yes it does please see the product overview for contents.
Q- what is the product code to order an extra tie clip mic for this system
- Nigel Shave
Answer- there is no order code - they are not available seperately. the reciever has 16 channels but only 1 input - this means you can use up to 4 of the kits without them interfering with each other (some of the cahnnels crossover each other).
Q- What battries dose the Transmitter require??
- Brinky
Answer- AA type.
Q- Do you stock soare clips for these
- John Sykes
Answer- Unfortunatley we do not stock spare parts for this item.
Q- Would these mics be suitable for recording?
- karen
Answer- Yes the product does support that. Although they are primarily intended for live audio work usually.
Q- Only one belt pack and tie clip mic comes with the transmitter. can extra belt packs and tie clip mics be purchased from yourselves?
- Big Jon
Answer- i am afraid not
Q- I need to purchase a new AC/DC Adaptor for this Mic system. I've tried to google the code no but cannot find one that matches. Can you tell me where I can buy one.
- brian parkinson
Answer- The item uses a 16V DC supply which is quite hard to obtain to be honest. The only items capable of supplying said voltage in our range would be a laptop supply such as our order code N03GC I am afraid.
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
UHF Professional Tie-Clip & Instrument Wireless Mic System
also searched for:
Radio Microphone And Receiver - Radio Microphone System - Tie - Clip Microphone System - Tie - Clip Microphone With UHF Receiver - Tie - Clip Radio Microphone System - UHF Tie - Clip Radio Microphone - UHF Tie - Clip Radio Microphone System - Wireles Microphone And Receiver - Wireless Microphone System -