- Complete two channel remote control system
- Switches up to 12A at AC 230V mains
- Up to 30m range
- High security protocol
- ‘Easy learn’ transmitter feature
- Easy installation via screw terminals
- Momentary or latching outputs
- Requires no radio licence
A versatile general purpose remote control, which can be used for controlling many different applications such as garage doors, garden lighting, gate and door control, etc. The system utilises a highly secure code-hopping protocol to ensure safe operation.
Easy to install, the receiver is connected using standard screw terminals and is powered from DC 12V. The two output relays can switch up to 12A at AC 230V mains and are operated individually by pressing one or other of the keyfob buttons. Either or both of the relays can be set to toggle on/off or switch momentarily when the transmitter button is pressed.
The system is supplied with one two-button keyfob transmitter and the receiver can learn up to a total of 6 keyfobs for multiple users. If a keyfob is lost or stolen, then simply reset the unit and teach it a new keyfob code.
Additional two-button keyfobs are available: Order Code RN56L.
Technical Specification
| | |
| Specifications:
|
| Transmitter battery: | 23A (supplied - replacement JG91Y)
|
| Operating frequency: | 433.92MHz
|
| Receiver supply voltage: | DC 12V
|
| Receiver current: | 6mA (standby), 66mA (switching)
|
| Two relay outputs rated at: | 12A peak / 5A continuous @ 230Vac
|
|
|
Frequently Asked Questions
Q- Do you supply a product with similar capabilities which is swiched by infra red instead of radio?
- martin
Answer- No sorry
Q- hi i have bought your 3channel rf remote control from quasaruk and it says to short the learn pins to learn a new key fob .however it doesnt say which pins these are as there are 12 to choose from. The data sheet on the quasar site only has 10pins and has them labelled, i think it is for an older model. Please help!
- dan peppiatt
Answer- http://www.maplin.co.uk/Module.aspx?ModuleNo=46950
There is a diagram on the link above.
Q- Hi, can this switch 12V DC, or does it only control AC? Thanks.
- David McLoskey
Answer- This can be used to switch DC.
Q- Could i use this as a replacement key fob for my immboilser for a ford probe 1995 car
- Bernard Ameyaw
Answer- No sorry this product does not support that.
Q- Is the 12V DC Power Supply included in the unit?
- Peter Branagan
Answer- Power supply not included unfortunately.
Q- Could you please tell me the dimensions of the receiver?
- Simon Brock
Answer- This is approximately 2" x 4".
Q- Hi does this (L27BK) come with remote controls and if the answer is "yes" how many are there 1 or 2. Thanks
- Liam Daly
Answer- This just comes with the one.
Q- Do you know if this quasar keyfob will operate the Shark remote receiver L55AF??
- James
Answer- No sorry this product does not support that.
Q- is there technical support for this product?
- Robbie
Answer- Yes here:- support@quasaruk.co.uk
Q- can i get a datasheet for this please
- CKB
Answer- A datasheet can be obtained by contacting our technical team directly via technical@maplin.co.uk
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
Two Channel Wireless Remote Control Kit
also searched for:
two channel rc kit - two channel wireless rc kit - Two Channel Wireless Remote Control Kit - wirless control kit - wirless two channel rc kit -