Product Features

• Send digital TV or other video signal upstairs or to another room without using cables
• Compatible with practically any video source (DVD, TV, satellite, PC, etc)
• Ideal for use with Freeview, free-to-air, Freesat and Sky TV boxes
• Change channel from another room with the built-in IR remote repeater (not IrDA compatible)
• Stable 2.4GHz signal operates through most walls, floors and ceilings
• Up to 100m transmitting range
• PAL and NTSC compatible
• Very easy to set up
• Box Contents: 1 x Transmitter, 1 x Receiver, 1 x Transmitter SCART Lead, 1 x Receiver SCART Lead, 1 x Remote Eye, 2 x Mains Power Adaptors, 1 x Manual.

Simply plug the transmitter into the source device (DVD, satellite receiver, etc) and the receiver into the SCART socket of the TV. The audio and video will then be transmitted from the source device to the second TV wirelessly. For maximum convenience, the unit also relays signals from your remote control back to the source so you can use your remote to change channels from the other room. You can receive the transmission in extra rooms in your property if you have a receiver in each of these rooms - Spare receiver Order Code: A86CR. Please note: This item may not fully function with certain Sky+, Sky HD or Virgin Media set-top boxes. This will allow you to send/receive the Audio/Video signal, but the remote relay for this item only functions with IR (Infrared) and some of these Set Top Boxes use IrDA (Infrared Data Association), which means you would not be able to use the remote control from the receiving location to change the channels.

Download our 'how to...' guide - Video Senders - CLICK HERE (pdf)

Box contents

1 x Transmitter
1 x Receiver
1 x Transmitter SCART Lead
1 x Receiver SCART Lead
1 x Remote Eye
2 x Mains Power Adaptors
1 x Manual

Technical Specification

AV transmit frequency:	2.4GHz
Remote control frequency:	433.92 MHz
AV signal range:	100 metres (328 feet) clear line of sight
Remote control signal range:	70 metres (230 feet) clear line of sight
Antenna:	Built-in omni-directional antenna
Channel:	3 selectable channels
AV mod/demod.method:	FM
Audio:	Stereo audio input and output
Video:	Composite video input and output
Dimensions:	13(w) x 3.2(h) x 10.5(d) cm
Weight:	160g each for transmitter/receiver
Power:	DC 9V (300mA)
Operating temperature:	0 ~ 40 (32 ~ 104 )

Download Centre - Technical, Firmware and Information

L24AU Manual.pdf

Frequently Asked Questions

Q- Will product Aud/vid sender 2727 work from a freesat box and work on a old tv? - Mrs Annable

Answer- Yes the product does support that.

Q- Once the receiver is set up in an additional room to receive sky tv, are you able to change channels on the slave tv through the existing slave tv remote or do you have to use the sky remote. - Lee Thomas

Answer- All additional receivers have an Infra-red sending function, therefore all additional receivers have the capability of changing the channel (as long as you have the remote in that room)

Q- Does this transmit all the time or only when tv is on? Are there easily accessible on/off buttons to turn off when not in use? - Darren

Answer- It will transmit all the time. there is a power switch on the rear of the unit (this can be seen on the large picture on the rear of the unit).

Q- Can you watch a different channel to the one on the main TV ie. itv downstairs bbc 1 upstairs bbc 2. - Stephen Towell

Answer- Unfortunately not, this unit only allows you to watch what the source is watching.

Q- regarding the Audio/Video Sender Kit 2727. do I need a television aerial connected to the slave TV as the room has no aerial point. - andy burrows

Answer- no you do not need a aerial for the slave tv as the receiver plugs in to the scart socket

Q- Will I get interference from a wireless router? - G Grace

Answer- There is the potential for interference from a wireless router i am afraid.

Q- Can we have more than one slave box as we seem to have tvs all over the house - Stephen Collett

Answer- Yes, you can add as many recievers as you like.

Q- can you plug the cable from an external aerial directly into the device for it to transmit to TV's in the house? - r gray

Answer- No sorry this product does not support that.

Q- I don,t have an audio output connection on my TV,can I use this device to transmit audio signals from tv to a Amp in order to enhance my tv sound through my sterio speakers. if not can you recomend such a device. Thank's - Mike

Answer- No sorry this product does not support that.

Q- do you stock spare parts for these units - paul moran

Answer- unfortunately not

 

Email this page     Print this page
*Stock figures are automatically updated every 10 minutes.Please Click here to check our current live figures Customers searching for Audio/Video Sender Kit 2727 also searched for:
A/V Sender - Video Link - Video Sender - Wireless A/V Sender - Wireless Video Sender - Wireless Video/TV Link -