- Send digital TV or other video signal upstairs or to another room without using cables
- Compatible with practically any video source (DVD, TV, satellite, PC, etc)
- Ideal for use with Freeview, free-to-air, Freesat and Sky TV boxes
- Change channel from another room with the built-in IR remote repeater (not IrDA compatible)
- Stable 2.4GHz signal operates through most walls, floors and ceilings
- Up to 100m transmitting range
- PAL and NTSC compatible
- Very easy to set up
Simply plug the transmitter into the source device (DVD, satellite receiver, etc) and the receiver into the SCART socket of the TV. The audio and video will then be transmitted from the source device to the second TV wirelessly. For maximum convenience, the unit also relays signals from your remote control back to the source so you can use your remote to change channels from the other room.
You can receive the transmission in extra rooms in your property if you have a receiver in each of these rooms - Spare receiver Order Code: A86CR.
Please note: This item may not fully function with certain Cable set-top boxes. This will allow you to send/receive the Audio/Video signal, but the remote relay for this item only functions with IR (Infrared) and some of these Set Top Boxes use IrDA (Infrared Data Association), which means you would not be able to use the remote control from the receiving location to change the channels.
Download our 'how to...' guide - Video Senders - CLICK HERE (pdf)
Box contents
1 x Transmitter
1 x Receiver
1 x Transmitter SCART Lead
1 x Receiver SCART Lead
1 x Remote Eye
2 x Mains Power Adaptors
1 x Manual
Technical Specification
| | |
| AV transmit frequency: | 2.4GHz
|
| Remote control frequency: | 433.92 MHz
|
| AV signal range: | 100 metres (328 feet) clear line of sight
|
| Remote control signal range: | 70 metres (230 feet) clear line of sight
|
| Antenna: | Built-in omni-directional antenna
|
| Channel: | 3 selectable channels
|
| AV mod/demod.method: | FM
|
| Audio: | Stereo audio input and output
|
| Video: | Composite video input and output
|
| Dimensions: | 13(w) x 3.2(h) x 10.5(d) cm
|
| Weight: | 160g each for transmitter/receiver
|
| Power: | DC 9V (300mA)
|
| Operating temperature: | 0 ~ 40 (32 ~ 104 )
|
|
|
Download Centre -
Technical, Firmware and Information
Frequently Asked Questions
Q- Could this be connected to a freeview box only without tv set and send signal to a tv set I.E. main only tv set in another room.
- K.Ash
Answer- Yes, this would be able to do this.
Q- will this work if the satellite receiver downstairs is turned on but the TV downstairs is turned off?
- Rob
Answer- Yes the downstairs TV doesn't need to be on
Q- does the L24AU AUDIO/VIDEO SENDER WORK ON A VIRGIN V+ BOX
DOES IT ALLOW TO TO CHANGE CHANNELS FROM THE REMOTE TV SET
- ALLAN LAW
Answer- No sorry this product does not support that.
Q- Can two slave boxes receive from the one sender at the same time
- Paul
Answer- Yes the product does support that.
Q- My tv is old and does not have a SCART socket, can I get some sort of adaptor
- Rachel
Answer- See maplin code VH89.
Q- Is there a signal delay when watching on a second TV?
- Terry
Answer- There should be no delay.
Q- In the product features theit states 'Ideal for use with Freeview, free-to-air, Freesat and Sky TV boxes' however in the customer questions there is this Q&A
Q- You mention that the item may not be fully functional with all set top boxes, especially with the remote control. Is Sky an issue here? - Sarah
Answer- Sky would not be compatible with this item.
can you clarify please ?
- Trevor Clark
Answer- The Audio and Video will be transmitted absolutely fine, the remote control will not work.
Q- can you plug the cable from an external aerial directly into the device for it to transmit to TV's in the house?
- r gray
Answer- No sorry this product does not support that.
Q- regarding the Audio/Video Sender Kit 2727. do I need a television aerial connected to the slave TV as the room has no aerial point.
- andy burrows
Answer- no you do not need a aerial for the slave tv as the receiver plugs in to the scart socket
Q- How does this system fair with interference from neighbours senders? can channels be fine tuned to avoid issues?
- guy
Answer- The unit has 4 channels which should allow you to set your senders to a specific frequency that is not occupied by another local source.
Email this page
Print this page
*Stock figures are automatically updated every 10 minutes.Please
Click here
to check our current live figures
Customers searching for
Audio/Video Sender Kit 2727
also searched for:
A/V Sender - Video Link - Video Sender - Wireless A/V Sender - Wireless Video Sender - Wireless Video/TV Link -