kemo-timer-switch-module

Free delivery

Kemo Timer Switch Module

Code: N83QL

  • Switch your device on the automatically turn it off after a certain time has elapsed
  • Control a device up to 25V and 3A and set a time between two seconds and 23minutes (± 30%)
  • Comes pre-assembled just connect your device, power supply and switches

Product details

Kemo Timer Switch Module

• Switch your device on the automatically turn it off after a certain time has elapsed
• Control a device up to 25V and 3A and set a time between two seconds and 23minutes (± 30%)
• Comes pre-assembled just connect your device, power supply and switches
• Requires a 12-15V DC power supply (not included) and to push switches (not included)

What does this module do?
Use this module (manufacture code M113A) to have a timed off switch for your devices. Connect two switches (not included), your device and your power supply (not included) to the module. Set how long you want the device on for, then switch it on with one switch and it will automatically turn off when the time elapses, or use the other switch to stop it earlier. You can set a time for as short as two seconds or as long as 23 min (± 30%) depending what you’re timing. The built-in relay can be used to trigger a device using a power supply of up to 25V and 3A. Two LEDs tell you when the module is powered and whether the relay is currently on.

Do this module require assembly?
The module comes assembles in a sealed module with flat pin connectors for your power supply, switches and relay connection. A relay can be used to trigger another circuit so you can use a small powered relay to trigger a larger system powered off its own power supply. When connecting to the module take care to observer the power supplies polarity.

What can I use this module with?
This is a great kit for anyone who want to set a timer for an automatic off on anything from a desk light, buzzer or display. With a compact module you can easily mount this in a project. This kit requires a 12-15V DC power supply.

Specifications
Number of components in the kit? 1
Soldering required No
switching voltage 25V
Temperature range 70
Timer intervals 2 sec - 23 min (+/-30%)
Power supply requirements DC 12-15 V
Current consumption 20 mA (relay off)/ 80 mA (relay on)
Module size 87 mm x 60 mm x 33 mm

Hi, If the start button is held closed will the output switch to off after the set time, for example 15 minutes?

Asked by: Robert
Unfortunately we are unable to guarantee full compatibility for this item, as this is not the manner for which it was designed to be used.
Answered by: Dominic
Date published: 2017-01-23

Can this timer switch module, timing be delayed by holding the start button to On and start the time down after it has been turned Off ? I need the time out to be delayed 

Asked by: FarmerJohn
No, I am sorry but the item will not work for this use.
Answered by: Dominic
Date published: 2017-01-11

Sir, can I use this for reversing a motor. I want to run the motor in one direction for a time then I want to reverse the motor for the same time. this is for a model draw bridge. if this is not suitable can you please suggest alternative. Fred

Asked by: fred
As much as we would love to be able to help here, we cannot offer design project advice or assistance, we are more than happy to locate products and support you with your purchases but we are not able to design entire circuits or projects for you. If you do have the design/circuit information detailing the value of the components needed we will be happy to locate these for you.
Answered by: Dominic
Date published: 2016-10-31

I am making a inflatable device ,for a band, the timer switch i used is a pnematic time delay switch, it works ,but isnt reliable, would this one work? the box has a 14 volt battery ,to power a 12 volt compressor,needs to cut off after 5mins

Asked by: micky
As much as we would love to be able to help here, we cannot offer design project advice or assistance, we are more than happy to locate products and support you with your purchases but we are not able to design entire circuits or projects for you. If you do have the design/circuit information detailing the value of the components needed we will be happy to locate these for you. This item may work for you but you would need to select the correct item.
Answered by: Dominic
Date published: 2016-09-20

Can the timer be triggered by the switch cutting the power or does the switch have to provide  power to the unit to activate the timer

Asked by: None
This information is best detailed in the user manual / datasheet which is available from the download tab on the products webpage, if you do need any in-depth Technical support please feel free to give us a call on 0333 400 9500 or email us on technical@maplin.co.uk
Answered by: Dominic
Date published: 2016-05-18

On the start and stop buttons, is any voltage supplied to them?

Asked by: Steve
Yes this will be 12v trigger in.
Answered by: Darren
Date published: 2016-01-27

Hello, on the two switch inputs. Do you use two positive inputs & a common earth? The instructions are a little unclear. Many thanks.

Asked by: Caldron
The switch should be live in, live out and common ground.
Answered by: Russell
Date published: 2015-11-25

What type of push button is required for this? I need the time switch to be be on by default when powered up. Can they 'start' be wired together or switch used?

Asked by: nefarious
It is important to note that as a retail only company we are unable to assist with any design projects or queries, or advise on specific products that may be required for your purpose.
Answered by: Dominic
Date published: 2015-10-15
  • y_2017, m_5, d_19, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_GB, sid_N83QL, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Bulk Prices

Item code Item name Quantity Price
N83QL Kemo Timer Switch Module (1+) £22.99

Why not tell us and our B2B sales team about your specific business needs and expectations?

At Maplin, we’re always looking for innovations and technology that can help your business work more efficiently.

With a dedicated business team and special services available only to business customers, you can access our electronics and technology solutions through our wide network of over 200 stores, our website with more than 20,000 products or though your personal account manager over the phone.

Working with organisations for nearly 30 years, Maplin offers a nationwide range of benefits to our business users:

  • 30 day EOM credit account
  • volume discount pricing
  • online and in-store use of account
  • one-to-one account management
  • bespoke product sourcing and branding
  • free delivery on orders over £10
  • scheduled and forward ordering service

Contact our business team on 

0333 400 9740 to open an account or discuss your business needs.

To receive your free copy of the Maplin Catalogue just call 0333 400 9740.

£22.99

  • Home Delivery
  • Click & Collect