Lynteck LS400 Wired Intruder Alarm Kit

Code: N47CL

Lynteck LS400 Wired Intruder Alarm Kit is rated 4.2 out of 5 by 17.
  • y_2017, m_5, d_23, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_15
  • loc_en_GB, sid_N47CL, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb
  • Wired for a reliable and more secure signal
  • Contains 2 PIR sensors and expandable up to 4 PIR sensors and many more door and window sensors
  • Can be part armed for additional flexibility

Product details

Lynteck LS400 Wired Intruder Alarm Kit

• Wired for a reliable and more secure signal
• Contains 2 PIR sensors and expandable up to 4 PIR sensors and many more door and window sensors
• Can be part armed for additional flexibility
• High intensity 110dB siren programmable for up to 10 minutes

Easy to Setup and Ready to Go
The Lynteck LS400 Wired Intruder Alarm Kit comes supplied with everything you need to set it up in the box. The kit comes with four sensors which can be used on doors or windows, two PIR sensors as well as all the screws, fixings which are required (backup batteries for the control panel are not included Order Code L43AL). The patented two wire system means there is no polarity on the wires making for even easier installation.

What is home mode?
The Lynteck LS400 Wired Intruder Alarm Kit can be fully armed or part armed in home mode which allows you to program some sensor to switch off so you can more freely about the home whilst still being secure outside. Sensors can be manually set as to whether they are on or off in home mode allowing you all the flexibility you need.

Can I add to the alarm?
The Lynteck LS400 Wired Intruder Alarm Kit can be connected to a range of additional sensors and accessories giving you the flexibility to protect every part of your property. The Lynteck LS400 Wired Intruder Alarm Kit can be expanded to utilise up to four PIR sensors and multiple door and window sensors. The system is completely wired with tamper detection alarm meaning that if an intruder attempts to cut the wire or open a sensor the alarm is triggered so you can rest easy knowing that your property is secure.

Compatible Accessories
Lynteck TW402 Additional Wired PIR Sensor N48CL
Lynteck MRS101 Additional Wired Door & Window Contacts N49CL

Specifications
Power Source
Mains Yes
Battery Yes
Mains and battery backup Yes
Low battery indicator No
Connectivity
Wireless No
Frequency N/A
Wired Yes
Cable length 50 m
Phone landline No
Smartphone enabled No
GSM enabled No
RFID tags No
Sensors
PIR movement Yes
Door / Window Yes
Panic button Yes
Key fob remote No
Remote Control No
Fire detector No
Gas detector No
Monitoring and alerts
Remote Controlled via smartphone app No
Manually controlled via control box in the home Yes
Remote controlled via key fob remote No
Push notification alert No
Siren Yes
Siren alert 110 dB @ 1 m
Siren duration 1 / 3 / 10 min
Operating range
Maximum operating range N/A
Transmission frequency N/A
Operating systems and protocols
IOS N/A
Android N/A
General
Expandable Yes
Operating power AC 220 V - 240 V
Dimensions 185 mm x 35 mm x 160 mm
Weight 342.8 g
Outdoor Rated No
Battery type(s):
for control unit 8 x AA Batteries
for sensors and accessories N/A
Test mode button No
Package Contents
LS400 Control Unit
Combell External Siren
4 x Magnetic Contacts
2 x PIR Sensors
Power Adapter
2-Core Wire 50m (not for mains wiring)
Screw / Wall Plugs Pack
Rated 3 out of 5 by from This is a good product for the price. I don't think the installation was straightforward for someone who does not do regular DIY but after some careful reading, I was able to put it all together. I found that the sensitivity it is usually set to is not really good enough at all. I have one of my PIR's directly facing a door and two of us were able to literally walk past it into my living room without it setting off. I understand there is a way to change the sensitivity but I did not find this obvious from the instructions initially but will have to review this. Hopefully should do the job well once changed.
Date published: 2013-08-28
Rated 4 out of 5 by from Second order for this system arrived promptly. First one was straightforward to install from the clear and detailed manual and has worked well. Only puzzle was how to replace reserve batteries without triggering the "tamper-alarm" ! Only two minor niggles: (a) Rechargables seem to show "battery low" from day one, so must test sometime soon. (b) max of 4 PIRs - 2 on each of 2 zones - but actually enough for me !
Date published: 2010-10-31
Rated 5 out of 5 by from Second one of these ive purchased within a month,great value,easy to install,plenty of pre-programed features that have been well thought about,would recomend this product without hesitation,only time will tell me how reliable it is.but both systems working fine at present
Date published: 2013-07-31
Rated 5 out of 5 by from This is the simplest alarm to fit even used my old alarm wires to save time just picked two wires red/blue it was that easy and no probblems it is that simple
Date published: 2012-05-09
Rated 5 out of 5 by from Great Alarm Easy to install and good quality. Easy to use highly recommend it ;)
Date published: 2013-04-16
Rated 5 out of 5 by from Very easy to fit and install
Date published: 2012-02-13
Rated 5 out of 5 by from Easy to install and great quality for the price
Date published: 2013-04-17
Rated 4 out of 5 by from Good value and very clear fitting instructions I was impressed with how much was in the kit for the cost. It seems very good value for money. I am using it to protect a shed so I didn't need all of the components. The fitting instructions were very well written. The main limitation for me is that the external siren has no battery backup. So all an intruder would have to do would be to pull the wires out and that would silence it. First couple of weeks use has been OK except that when disarming the system on entering the building by tapping in the 4 digit code it doesn't give a bleep after you push each number on the keypad. So sometimes it has taken me three attempts to put the number in before the system would disarm. So far I've always been able to turn it off before the alarm goes off but I'm not convinced that will be the case if and when the keypad becomes worn.
Date published: 2017-05-11
  • y_2017, m_5, d_23, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_15
  • loc_en_GB, sid_N47CL, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

The description says 4 magnetic contacts. However, the picture shows two ie magnet plus contact in pairs. Are there a total of 4 in the kit?

Asked by: Filtd
The image is for illustration purposes only, the kit includes 4 of the contacts.
Answered by: Dale
Date published: 2017-03-09

Will it be posible to purchase the control box and one pir of this system as it is all i need to cover my garage

Asked by: Doc Kelly
Unfortunately i am sorry but the item in question doesn't support use in you intended application.
Answered by: darren cordon
Date published: 2017-03-07

 If i Only use 1 per and 1 window door contact I assume i just leave the connection points in the panel for the others empty??? Does the external siren flash when the alarm Is activated by an intruder. Does this system allow me to omit zones>

Asked by: Alarming
Full instructions for the kit are provided on the listing. https://maplindownloads.s3-eu-west-1.amazonaws.com/N47CLN48CLN49CLUser-Manual-2940.pdf You can install whichever number of devices you wish. You can part arm the system to omit areas The external bell box in the kit is siren only.
Answered by: Les
Date published: 2017-01-24

Can I put another sounder on this system?

Asked by: Andy
This unit only has one terminal set for an external siren, as such we cannot guarantee compatibility for additional sounder units.
Answered by: Gareth
Date published: 2017-01-08

Just bought this alarm package for the garage. I don't need to use the pir detectors. Therefore, do I just connect their terminals in the control unit with a short piece of wire ? Can I use the other door contacts on the pir detector conectors instead ?

Asked by: Martin
This is a self fit item, as such we are unable to assist with individual installation instructions. A comprehensive manual is supplied with the unit and can also be found here. https://maplindownloads.s3-eu-west-1.amazonaws.com/N47CLN48CLN49CLUser-Manual-2940.pdf The manufacturer also provides an online portal for assistance with their products http://www.lynteck.co.uk/contact-us.php
Answered by: Les
Date published: 2016-07-08

I want to install this in a garage with up & over door, side door & window, the window could be set as zone 2 but the side door, up & over door & PIR's would all need to be set as zone 1 as entry could be from any of these points. Is this possible?

Asked by: sezian
This service is for frequently asked questions and does not allow two way communication, In order for us to best assist you with your technical issue please contact us on the details below: 0333 400 9500 or email technical@maplin.co.uk
Answered by: Billy
Date published: 2016-06-20

How do you set up the Lynteck LS400 wired intruder alarm system?  Have done all the wiring but I'm stuck with the coding 

Asked by: J kassim
Full instructions for setup can be found here. https://maplindownloads.s3-eu-west-1.amazonaws.com/N47CLN48CLN49CLUser-Manual-2940.pdf If you require dedicated assistance Lyntech provide this via their web portal. http://www.lynteck.co.uk/contact-us.php
Answered by: Les
Date published: 2016-06-16

Will the two wire Lynteck system operate with existing six wire PIRs ?  If so which terminals on the PIR should be connected. Thank you.

Asked by: Chris2378
This information is presented in the user guide/datasheet for the device, which can be found on the downloads tab of the product listing. However if you are using a mobile phone or tablet to view our website it may not be visible. To this end I have copied in a link to the electronic version of the instructions below for your convenience. https://maplindownloads.s3-eu-west-1.amazonaws.com/N47CLN48CLN49CLUser-Manual-2940.pdf This is a two wire system only, it is not suitable for use on 6 wire PIR
Answered by: Les
Date published: 2016-05-17
  • y_2017, m_5, d_22, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_40
  • loc_en_GB, sid_N47CL, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Bulk Prices

Item code Item name Quantity Price
N47CL Lynteck LS400 Wired Intruder Alarm Kit (1+) £55.99

Why not tell us and our B2B sales team about your specific business needs and expectations?

At Maplin, we’re always looking for innovations and technology that can help your business work more efficiently.

With a dedicated business team and special services available only to business customers, you can access our electronics and technology solutions through our wide network of over 200 stores, our website with more than 20,000 products or though your personal account manager over the phone.

Working with organisations for nearly 30 years, Maplin offers a nationwide range of benefits to our business users:

  • 30 day EOM credit account
  • volume discount pricing
  • online and in-store use of account
  • one-to-one account management
  • bespoke product sourcing and branding
  • free delivery on orders over £10
  • scheduled and forward ordering service

Contact our business team on 

0333 400 9740 to open an account or discuss your business needs.

To receive your free copy of the Maplin Catalogue just call 0333 400 9740.

£55.99

  • Home Delivery
  • Click & Collect