Call 0333 400 9500 or Email us
Nikkai 4 Sensor Wired Reversing Kit
|Rated voltage:||DC 12 V|
|Operating voltage range:||DC 10.5 V~15 V|
|Rated current:||200 mA max.|
|Detection distance:||0.1~1.5 metres|
|Stage 1 detection range:||110 ~150 cm|
|Stage 2 detection range:||50~100 cm|
|Stage 3 detection range:||10~40 cm|
ReviewsWrite a Review
10 of 41 Reviews
These little sensors are superb, merging easily into your vehicles bumper skirts or rear fenders with the quality of factory installed products. Everything you need is in the kit including hole cutter and the wiring could not be easier. Just find a connection onto one of your rear reversing bulbs and crimp or solder it on. Wires are then discreetly fed under the carpets to wherever you decide to place the neat little display with built in buzzer. I bought mine 2 years ago for my flashy coup??� and will now order another for its replacement next week.
purchased on wednesday 23 oct 2013 ,good price on offer at the moment. Got it fitted by mechanic and really happy with sound and display plus most importantly, accuracy. Very responsive and perfect in all aspects. I am very very happy, fitted in golf and my reversing has become tension free. I would recomend to all car owners. Thank u maplin Leicester store.
brilliant, easy to fit ,and works really well
No problems. Worked fine in my SLK. Tips: the sensors can be painted (using plastic undercoat first). Put wide tape on the bumper before drilling to prevent scratches. Put it all together temporarily first before chasing through all the wiring to make sure it all works.
great item, easy to fit when you know what wire is the live for the reversing light to connect the unit to check online or in an owners book to check its the right one. took under an hour to fit and have working. highly recommended
Easy to fit and wire up. Good value for money
A great piece of kit which I collected from store. Very carefully protectively packed and presented in a substantial but attractively designed cardboard box. (No plastic here). It took the the best part of 4 hours to install it but I admit to being rather fastidious where neatness is concerned by removing the rear scuttle/bumper to fit the sensors and secure the wiring It does exactly what it says on the box and the distance warnings it gives on the dash display are incredibly accurate. Suffice to say I am very pleased with the purchase.
bought this while on offer for wifes Freelander 1 after an unfortunate nudge into a Merc. The connection instructions are brief but with basic knowledge of car electrics the connection are easy to make. The rest of the instructions are useful and the most difficult part is finding discrete cable routes for the sensor wires and display cable. I managed to run it alongside the cars main wiring loom after removing a fair amount of trim. Its worth checking behind the rear bumper to ensure there is 25 mm clearance for the sensors. The product works fine and I wish I had fitted it sooner, may have saved me a few quid!
Bought whilst on offer and having read the reviews, I thought I'd give it a go. It took me about 3 1/2 hours to fit on my wife's Ford Fiesta, but I'm meticulous with the planning and installation. Her car is black so we don't need to paint the sensors. In fact it was really easy to fit. Works really well, in fact I prefer it to the factory fitted version on my car as this version tells you the distance quite accurately as well as which side the obstacle is. The Beeper is situated in the display unit which I located on top of the dashboard and is a little loud though. Other than that, for the price and functionality, I cannot fault it!
Fitted to my Kia Cee'd a few days ago. A bit "fiddly" but worth the trouble of making a good job of it. I was impressed with the kit and am delighted with its performance so far. Everything worked OK first time, and the distances displayed are very accurate. In five year's time I'll be able to comment on reliability.
QuestionsAsk a Question
10 of 14 Questions
Is it necessary to remove the bumper to fit the sensors?
John Clough said:
What are the dimensions of the in-car display panel used in the reversing kit A61JJ ? Thanks.JCC
Ernie Williams said:
can the sensors be painted to match the bumper colour
matt blake said:
can these sensors be fitted when a toebar is fitted ?
How long does it take to fit this item?
patrick jones said:
Is is possible to put two sensors on the back and two on the front. Is there sufficient cable to do this? Thank you.
Is the volume of the audible indicator adjustable?
garth walker said:
is the display panel mounted on the dash or rear of car
Will this unit still work if the reversing light bulb blows?
do you stock a connector that will clamp on to the wire.that is to connect the live to the unit,and one to connect the earth also.
|Item code||Item name||Quantity||Price|
|A61JJ||Nikkai 4 Sensor Wired Reversing Kit||(1+)||£39.99|
Why not tell us and our B2B sales team about your specific business needs and expectations?
At Maplin, we’re always looking for innovations and technology that can help your business work more efficiently.
With a dedicated business team and special services available only to business customers, you can access our electronics and technology solutions through our wide network of over 200 stores, our website with more than 20,000 products or though your personal account manager over the phone.
Working with organisations for nearly 30 years, Maplin offers a nationwide range of benefits to our business users:
- 30 day EOM credit account
- volume discount pricing
- online and in-store use of account
- one-to-one account management
- bespoke product sourcing and branding
- free delivery on orders over £10
- scheduled and forward ordering service
Contact our business team on
0333 400 9500 to open an account or discuss your business needs.
To receive your free copy of the Maplin Catalogue just call 0333 400 9500.
- Home Delivery
- Click & Collect