raswik-raspberry-pi-1-b-b-wireless-inventors-kit

Free delivery

RasWIK - Raspberry Pi 1 B / B+ Wireless Inventors Kit

Code: N78CE

RasWIK - Raspberry Pi 1 B / B+ Wireless Inventors Kit is rated 2.0 out of 5 by 4.
  • y_2017, m_6, d_23, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_GB, sid_N78CE, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb
  • Build and create wireless devices for your Raspberry Pi 1 B / B+
  • Hours of experimental fun with with 29 full projects
  • Out of the box connectivity
  • Limited stock may be available in some stores. Call us on 0844 557 6000 to check

Product details

RasWIK - Raspberry Pi 1 B / B+ Wireless Inventors Kit

• Build and create wireless devices for your Raspberry Pi 1 B / B+
• Hours of experimental fun with with 29 full projects
• Out of the box connectivity
• Starter examples require no soldering
• Comes with plug in wires and a solderless breadboard
• 4GB SD card image is include to save you from configuring
• Compatible with Raspberry Pi 1 B / B+ models only
• Examples use LLAP to drive the devices
For a full pictorial guide of projects available please click here

The Wireless Inventors Kit for the Raspberry Pi (RasWIK) is an exciting and affordable addition to the Raspberry Pi. RasWIK demonstrates that with our leading edge technology anyone (and we mean anyone) can build wireless sensors and actuators , you do not need huge experience, a degree or even any tools. We show you even how to connect the devices you build to "the Internet of Things" (IoT) service providers such as Xively.

You can build wireless devices in just a matter of minutes. All the code is fully Open Source, you can use, modify and even sell your own products based on this kit.

There are 29 fully documented projects. The 17 hardware projects take you from very basic sensors, actuators and light controls to more complicated ones that include measuring temperature and light levels. The 12 fully completed software projects show you how to do more sophisticated stuff, including posting your measurements on the Internet.

Out of the box all the hardware is configured to start you off without you writing a single line of code. The kit comes complete with an SD card image that has starter software and a fully configured Pi operating system already installed. The devices you make are even interoperable with our off the shelf wireless devices.

All software you need is located on the SD card, but if you want to download python application or a previous version please click here.
Rated 3 out of 5 by from Great Kit - Terrible memory card I have been playing with this kit for a few weeks now. The device its self is simply brilliant, I would say it has the potential to be very useful device for many applications. The documentation is basic but well written and I have enjoyed following the examples included. The only negative thing I can say about the package is the memory card included is a class 4 and its performance is utterly awful. Move to a faster card as soon as you can.
Date published: 2015-01-09
Rated 3 out of 5 by from Lots of kit, but not compatible with pi2 B I bought this together with my new Raspberry Pi 2 B, (which was supposed to be a Pi3 but which had vanished after payment once I arrived to pick it up in-store) got it home and found that they are not compatible. There is a different GPIO pin count , 40 vs 27, for starters, and the MICRO sd card does not load. I have since discovered that older software is not necessarily future compatible. It wouldn't have worked with a Pi3 anyway therefore, So whilst I am itching to use this kit I am at a loss as to where to go next. (Probably by another,older, pi.....) (incidentally I would have expected some sort of information on the maplin website about this but there isn't any.... so for me this has been a waste of money, and my experience with maplin has not been great.) Not only do I have the pi I didn't ask for by a kit that doesn't work with it. So buy this kit only if you have the older pi in other words, with a shorter GPIO.
Date published: 2016-06-19
Rated 1 out of 5 by from Not compatible for Raspberry Pi B+ This is not compatible for all raspberry pi models and you dont find this out until you get home open the box and try to install it. Inside the box is a little piece of paper telling you to go to a website to download what is needed for it to work with Pi B / B + but that is a far is it gets due to the website Ciseco not existing anymore. If i had know this then i would not have bought it and now i am faced with the problem of having to buy another Pi just to use this.. or facing a 60 mile round trip to return it to the store... Poor show Matlan not good.
Date published: 2017-04-13
Rated 1 out of 5 by from company gone bust the company that makes this seems to have gone bust ! The kit requires instructions, but the website with the instructions no longer exists rendering this product totally useless ! en-route back to the store to return it !
Date published: 2016-12-28
  • y_2017, m_6, d_23, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_GB, sid_N78CE, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

What freq range does the Slice of Radio work in?

Asked by: Honcho41
Unfortunately, this information has not been provided for the kit.
Answered by: Dominic
Date published: 2017-03-20

Does anyone know were the information that was on the website is so i can make it available for others using this kit?

Asked by: DMTarmey
https://github.com/procount/ciseco https://github.com/CisecoPlc
Answered by: Les
Date published: 2016-12-14

Where can I get the documentation

Asked by: Monk De Wholly De Honk
Documents can be found here http://52.50.15.149/Downloads/n78ce-doc1-10406 http://52.50.15.149/Downloads/n78ce-doc2-10407
Answered by: Les
Date published: 2016-12-09

Hi Will this work with raspberry pi 2 model B G Smith

Asked by: Snuf
This will work with all Pi's one is not provided with the kit.
Answered by: Darren
Date published: 2016-02-22

Which model of the Raspberry Pi is used? Pi 1 model B+ or Pi 2 Model B+

Asked by: steve
This will work with all Pi's one is not provided with the kit.
Answered by: Dominic
Date published: 2015-08-14

So does this kit include the actual raspberry pi itself or is it just accessories?

Asked by: Alex348
Just the accessories are included in this pack .
Answered by: Darren
Date published: 2015-07-24

What is included in the kit?
Asked by: Anonymous
The kit includes the following: Ciseco Slice of Radio, Ciseco XinoRF development board, 4GB SD card with Pi OS and sample software, USB cable, Small breadboard, 16x LEDs (5x Red, 5x Yellow, 5x Green, 1x Blue), 30x Resistors (10x 10k, 20x 470Ω), Transistor, Diode, Light Dependent Resistor, Thermistor, Piezo sounder, 3 x Push buttons, Assorted jump wires, Length of hook up wire. RW
Answered by: RW
Date published: 2015-07-17
  • y_2017, m_6, d_23, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_GB, sid_N78CE, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Bulk Prices

Item code Item name Quantity Price
N78CE RasWIK - Raspberry Pi 1 B / B+ Wireless Inventors Kit (1+) £39.99

Why not tell us and our B2B sales team about your specific business needs and expectations?

At Maplin, we’re always looking for innovations and technology that can help your business work more efficiently.

With a dedicated business team and special services available only to business customers, you can access our electronics and technology solutions through our wide network of over 200 stores, our website with more than 20,000 products or though your personal account manager over the phone.

Working with organisations for nearly 30 years, Maplin offers a nationwide range of benefits to our business users:

  • 30 day EOM credit account
  • volume discount pricing
  • online and in-store use of account
  • one-to-one account management
  • bespoke product sourcing and branding
  • free delivery on orders over £10
  • scheduled and forward ordering service

Contact our business team on 

0333 400 9740 to open an account or discuss your business needs.

To receive your free copy of the Maplin Catalogue just call 0333 400 9740.

£39.99

  • Home Delivery
  • Click & Collect