• Wire-free for a quick and easy installation and setup
• This kit contains one PIR sensor and the system is expandable up to 50 sensors, 10 remote controls and 50 RFID (radio frequency identification) tags
• Install a SIM card to automatically contact up to five phone numbers if the alarm is activated
• Long operating range of up to 80 metres
• Part-arm the system for additional flexibility
• High intensity 95dB siren programmable for up to nine minutesSpecial Features
• Monitor your home wherever you are, with microSD recordings (microSD card not included) from a wireless 720p indoor camera
• Uses RFID tags for simple and easy disarming
• Arm, disarm, set and monitor your alarm remotely using a smartphone
• SMS alerts warn you if any of your sensor’s batteries are running low or have been tampered withDownload the app to remotely monitor your IP116 camera What are the benefit of using an alarm with a SIM card?
Monitor your alarm from your phone with the Response miGuard G5 SIM enabled alarm kit. Fit a SIM card (not included – must be compatible with 2G networks) and you can program the control panel to contact up to five phone numbers and alert them if the alarm is triggered. When the alarm is triggered, the siren is activated and the telephone function starts to contact the phone numbers in order until one is picked up.
Arm, disarm, set and monitor your alarm remotely using the texts and the G5 app. Built-in two way communication means you can use the alarm control panel to speak and listen to those near the panel in the house. You can connect to your camera through the Wi-Fi on your phone, and take snapshots, record or live-monitor your home. How does the camera work?
Get a great view of what’s going on in your house with the IP116 Wi-Fi camera. The camera has a 1280 x 720 pixel resolution and can take 720p video at 30 frames per second. It comes with pan and tilt functions, night vision and two way audio so you can set up the best view and hear what’s going on wherever you are. The last 20 minutes of footage are recorded automatically and will save over the oldest recording when the microSD card is full. Take and save snapshots using your phone to view what’s going on. What is RFID?
RFID stands for radio frequency identification, and these are small tags that can be paired to the system. Each has its own RF code and name, and can be used to disarm the system by holding them to the control panel. The miGuard G5 wireless alarm kit even sends you a message to tell you which RFID tag was used so you know who is home.Is the system easy to set up?
This kit comes with everything you need to set it up included in the box, including one sensor which can be used on either doors or windows, one PIR sensor and all of the screws and fixings required. The sensors supplied with the miGuard G5 wireless alarm kit are pre-linked, so they can be put up straight away. The miGuard G5 Alarm Kit can be programed using the free app for your mobile phone, or on the control panel provided. How do the zones help?
The system can be fully armed or part-armed in home mode. This allows you to program some sensors to switch off so that you can move freely around the home whilst still being secure outside. What is included in this kit?
The kit comes with one IP116 Wi-Fi camera, one PIR sensor, one window and door sensor, a control box, two remote controls and two RFID tags – all of which wirelessly connect to each other. The sensors are paired wirelessly to your control box, which contains the 95dB alarm. The IP116 camera connects over your Wi-Fi with the free app for iOS and Android. You can expand your kit with up to 50 sensors, 50 RFID tags and 10 remote controls – all of which can be used up to 80m from the control panel. The unit will send you an SMS alert if any of the sensors has a low battery and the camera and control panel use mains power supplies, as well as a backup battery for your control panel so there’s no need to worry about running low on power.
Have a look at our range of compatible accessories, and see how you can expand your new security system:
Response miGuard SPS260R Wireless Outdoor Solar Siren Box A60LQ
Response miGuard M102 Additional Wireless Door & Window Contacts A62LQ
Response miGuard RC80 Additional Wireless Key Fob A63LQ
Response miGuard TAG26 Additional Wireless RFID Tag A64LQ
Response miGuard RT101 Wireless Alarm Range Extender A57NB
Response miGuard KP700 Additional Wireless RFID Keypad A54NB
Response miGuard PMR1 Additional Wireless Accessory Pack A58NB
Response miGuard Wireless Outdoor Solar Dummy Siren A84RZ