used-lightwaverf-thermostat

Used

(Used) LightwaveRF Thermostat

Code: B21RC

  • Smart heating thermostat
  • Access and control your heating (requires LightwaveRF boiler switch N79QJ)
  • Compatible with different systems - can be used for single or multizonal systems (requires LightwaveRF radiator valve N81QJ)

Product details

(Used) LightwaveRF Thermostat

• Smart heating thermostat
• Access and control your heating (requires LightwaveRF boiler switch N79QJ)
• Compatible with different systems - can be used for single or multizonal systems (requires LightwaveRF radiator valve N81QJ)
• Full temperature control via on board controls
• Control from anywhere via Apple, Android, Windows devices through the app over Wi-Fi or 3G/4G (requires LightwaveRF Link N55LL)
• The system is wireless, allowing for easy installation

Special Features

• Up to six programmable daily heating events to ensure your home is warm when you arrive
• Automatic frost protection which will switch the heating on to prevent low temperatures.
• Holiday mode ensures maximum energy efficient control
• Works as part of the LightwaveRF heating control range

What can I do with the LightwaveRF thermostat?

The LightwaveRF smart thermostat allows you to set and monitor your home’s temperature, when used with the LigtwaveRF boiler switch (N79QJ). The thermostat communicates via RF (radio frequency) to remotely control the activity of the boiler switch, switching on the heating when the air temperature falls below the thermostat’s settings.

The smart thermostat features a number of premade and custom schedules or settings that allow you to control how and when your home’s temperature is adjusted. Basic settings can be used to control the running time of your thermostat, allowing you to pre-set 'off-periods' to fit around your lifestyle. Other features such as boost, allow you to quickly increase your home’s temperature for a set period of time. Day- to-day heating schedules can be used, as well as the thermostat’s away and holiday modes, to specify the number of days a particular schedule is active. The thermostat features a default frost mode, allowing a minimal temperature to be set, to avoid damage to pipes or electrical items.

When used with the LightwaveRF Link (N55LL) and LightwaveRF boiler switch (N79QJ), there are two main benefits that become available to your existing LightwaveRF thermostat. The LightwaveRF Link allows the thermostat to be controlled via an app, allowing more intuitive control and a number of features such as being able to save custom heating schedules. The second benefit is the ability to further link your LightwaveRF thermostat together with other products within the LightwaveRF range. This allows PIR (passive infrared) sensors and smart lighting to be linked together with your heating, allowing you to achieve smart home automation.

When used with the LightwaveRF Link (N55LL), LightwaveRF boiler switch (N79QJ) and LightwaveRF radiator valve (N81QJ), this upgrades and takes advantage of the LightwaveRF's great modular design. The radiator valves give you zone control, allowing you to only heat the rooms you need, when you need them. This effectively changes your home central heating to a smart heating multi-zonal system. Each TRV (thermostatic radiator valve) will control the flow of hot water to the radiator, with an inbuilt thermostat which will monitor and activate the valve, depending on your set temperature.

The LightwaveRF thermostat does not have any annual fee/subscription, it is a solution to home heating that adjusts both your heating costs and comforts.

How can I control the LightwaveRF thermostat?

The thermostat features a set of on-board controls, giving you access to your home’s central heating, whilst also monitoring the current settings or modes. If used with the LightwaveRF Link an intuitive app, available for free, allows you to access and control your system from multiple devices simultaneously. Compatible with any iOS 5.0 device or higher including iPhones, iPods and iPads and Android devices running 4.0 and higher. Control your smart heating over Wi-Fi as well as 3G/4G. You never have to worry about accidently leaving the heating on, saving on your heating bill and reducing your carbon footprint

The thermostat also supports LightwaveRF’s remote heating controller (JSJSLW928), allowing the thermostat to be controlled from either the on-board controls or a remote control.

Will the LightwaveRF thermostat work with my existing central heating system?

The LightwaveRF thermostat is compatible with different zonal systems and setups depending on which additional LightwaveRF products are installed. It can be used for heating only (requires LightwaveRF boiler switch), or different heating zones (requires LightwaveRF radiator valve)

This kit does not contain the RF boiler switch, these are sold separately and required for installation (N79QJ)

How do I install the device?

Installation of the smart thermostat is easy, due to the pre-assembled and pre-wired control unit, requiring just batteries and syncing with the boiler controller. The boiler controller (sold separately) must be fitted by a competent person, and installation must comply with the guidance provided in the current IEE Wiring Regulations and current Building Regulations.





Power Source
Mains Yes
Interconnectivity
Wireless Yes
GSM Smart Device No
Push Notifications No
Control
Remote Controlled via App Yes
Remote Controlled via Text No
Operating Systems and Protocols
IOS iOS 5+
Android 4.0 minimum
Wi-Fi No
Browser No
General
Expandable No
Operating Power 2 x AA
Geolocation Yes
Automatic Frost Protection No
In Home Control Yes
Indoor Yes
Track Your Heat Temperature History Yes
Pin Lock Yes
Hot Water Boost Yes
Usage and Location Yes
Works with Existing Wi-Fi Router No lightwave link only
Package Contents LightwaveRF Thermostat Control
Dimensions Thermostat: 94 mm x 96 mm x 22 mm
Model Name / Number JSJSLW921
Installation This accessory must be fitted by a competent person, and installation must comply with the guidance provided in the current IEE Wiring Regulations and current Building Regulations.
Programmable Daily Heating Events Yes
Maximum Events 6
Installation Requirements
The LightwaveRF Thermostat is pre-assembled and pre-wired control unit, requiring just mounting onto a wall
Requires LightwaveRF boiler switch
Requires LightwaveRF link to use with other LightwaveRF range or user the LightwaveRF app

Bulk Prices

Item code Item name Quantity Price
B21RC (Used) LightwaveRF Thermostat (1+) £51.99

Why not tell us and our B2B sales team about your specific business needs and expectations?

At Maplin, we’re always looking for innovations and technology that can help your business work more efficiently.

With a dedicated business team and special services available only to business customers, you can access our electronics and technology solutions through our wide network of over 200 stores, our website with more than 20,000 products or though your personal account manager over the phone.

Working with organisations for nearly 30 years, Maplin offers a nationwide range of benefits to our business users:

  • 30 day EOM credit account
  • volume discount pricing
  • online and in-store use of account
  • one-to-one account management
  • bespoke product sourcing and branding
  • free delivery on orders over £10
  • scheduled and forward ordering service

Contact our business team on 

0333 400 9740 to open an account or discuss your business needs.

To receive your free copy of the Maplin Catalogue just call 0333 400 9740.

£51.99

  • Home Delivery
  • Click & Collect