Features

  • Construct your first circuit in minutes, no soldering required!
  • The easy to follow tutorial book takes you through 10 experiments with step-by-step instructions
  • All components are included to conduct the 10 experiments
  • Small prototype breadboard included for fast prototyping
  • Arduino UNO is NOT included


The Kitronik Arduino Inventors Kit is a great way to get started with programming and hardware interaction with the Arduino in the classroom. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, light sensors and capacitors.


Arduino is an open-source code-able electronics platform, which has been designed for anyone making interactive projects. Arduino board can process inputs from many sensors, and control outputs such as LEDs and motors.


The Arduino is controlled by the code with which it is programmed. This code is written in the Arduino programming language, using the Arduino development environment. Once complete the code is easily transferred to the Arduino board using a simple USB lead.

Please Note: Arduino UNO is NOT included in the kit.


Kit Contents:

1 x Mounting Plate.

1 x 7 Segment Display.

1 x Servo.

1 x Potentiometer - Vertical Type (finger adjust) 100K.

1 x Finger Adjust Spindle.

4 x Plastic Spacer 10mm.

1 x Small Prototype Breadboard.

1 x Terminal Connector.

4 x Push Switch.

1 x Motor.

1 x Transistor.

2 x Red 5mm LED.

2 x Orange 5mm LED.

2 x Yellow 5mm LED.

2 x Green 5mm LED.

1 x RGB 5mm LED.

1 x Fan Blade.

5 x 2.2KΩ Resistor.

5 x 10KΩ Resistor.

10 x 220Ω Resistor.

20 x Male to Male Jumper Wires.

1 x 470uF Electrolytic Capacitor.

1 x Piezo Element Buzzer.

4 x Pan Head M3 Machine Screw.

1 x Phototransistor.


Requires:

1 x Arduino UNO.

1 x Phillips Screwdriver.

1 x Terminal Block Screwdriver.

1 x Micro USB Cable