• Temperature range: 150-450 ᵒC
  • LCD screen displays temperature in ᵒC and ᵒF
  • 3 preset buttons for frequently used temperatures
  • High performance dual-core ceramic heater
  • MCU controlled temperature calibration

What makes this iron unique?
This ATTEN AT938D 60W Digital & Lead-Free Soldering Station is part of an LCD solder station. The iron is temperature-controlled and can be set through the station’s control buttons. The temperature is shown on the blue digital LCD display. This control will allow you to use the soldering iron in a range of different situations, from assembling or repairing PCBs to soldering electrical cables together. The station also includes a stand for the soldering iron to allow it to warm up without having to be held constantly. The included sponge on the stand allows you to keep the tip clean and free, enhancing the performance of your soldering iron.

What difference does the wattage make?
The wattage of a soldering iron is one of the most important factors when deciding which one to buy. Higher wattage will deliver more power to the iron’s tip, allowing it to heat up quicker. As this is a 60W mains soldering iron, it heats up the tip in under 30 seconds to a selected temperature, allowing you to start soldering without having to refill butane tanks or replace batteries.

Do I need anything else for this soldering iron?
This soldering iron is fully assembled. To get started, all you need to do is get some solder. Simply unpack this soldering iron and connect it to a mains socket. In under a minute, it should have warmed up to temperature and be ready for use.

Form FactorDesktop
Pack QuantityTotal 1 Piece(s)
In The BoxMain Unit Handle Set Iron Stand AC Cord Manual Cleaning Sponge
Dimensions21.0cm (W) x 25.0cm (D) x 13.40cm (H) - Weight 1.79kg
Voltage100/110/120/220/230/240V AC 50 to 60Hz
Heater Voltage24V AC
Temperature Range150 to 450C
Temperature Offset Range50C
Temperature Stability2C
Temperature DisplayDigital
Heater60W Dual-Core Ceramic Heater
Tip-to-Ground Impedance<2 Ohms
Tip-to-Ground Voltage<2mV