Pi Supply

Pi Supply
Set Descending Direction

Items 1-20 of 76

Page
Budget friendly motor controller
Programming the board to drive a motor is as simple as turning a pin on or off.
This now pre-soldered and features a new and improved design breaking out the GPIO Pins to the side of the board.
HDMI Male (19 Pin) to HDMI Male (19 Pin)
24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal-Transfer
Tested for Compatibility with the Raspberry Pi
Fully Ethernet and 3D over HDMI enabled (V1.4 Connection)
Supports 3D Content, Supports Audio Return Channel, Supports True HD Dolby 7.1 and DTS-HD Master Audio
Compatible for Windows ME, 2000, XP, Vista, WIN 7 and Mac OS with USB interface.
High speed data transfer up to 5 Gbps.
Card Compatibility: Supports SD/SDHC/SDXCMMC/MMC/RS MMC/MMC 4.0/ Ultra SD/ Extreme SD/ Extreme SD /T-Flash / MICRO SDHC/MICRO SDXC 35/5000
USB 3.0 interface
Fast transfer rate for reliable copy/download/backup.
Communicates with the Raspberry Pi via I2C
Gesture sensing up to 15cm
Fully compatible with Pi Zero & Pi Zero W
Full software libraries (fully open-source code
3D tracking
Includes S/PDIF input using either optical (TOSLINK) or electrical (RCA/coaxial) connections
Line-level RCA and headphone amplified 3.5mm jack outputs
Full high quality audio 108kHz / 24bit (uses 384kHz/32bit DAC chip but this is limited due to the S/PDIF input)
No soldering required
Powered by the 5v micro USB power supply - you probably already have one!
The holes are connected underneath with traces to mimic the solderless breadboards
We break out nearly every pin you could want to connect to the Raspberry Pi.
The Pi Crust ProtoHAT has a grid of prototyping soldering holes for attaching chips
ThunderBorg 5A motor controller
Up to three hours runtime!
4x high-torque 300 RPM metal geared 37mm motors (pre soldered)
105mm / 4 inch diameter off road wheels
Rugged 3mm thick Aluminium chassis
Touch and Tap sensing
No soldering required
Communicates with the Raspberry Pi via I2C
Fully CE and FCC tested and approved
One line installer
Chipset: Ralink 5370
WiFi 802.11b/g/n
Blue Activity Indicator LED
Doesn't Foul on Micro USB Power Cable
Supports 64/128-bit WEP, WPA/WPA2 encryption methods and 802.1x authentication standards
2 x suction cups
2 x lid pieces
Dimensions: 7.2cm x 3.4cm x 2.7cm
1 x orange base
2 x lid pieces
4 x suction cups
Dimensions: 8.9cm x 6.5cm x 2.8cm
1 x orange base
Many GND and 5V pins - you need those a lot.
Well labelled pins: They are grouped together logically including - GPIO / I2C / SPI / UART / Power.
Includes female headers that you can insert jumpers into.
A good project to learn to solder with.
Compact: Adds less than 2mm to the height of your Raspberry Pi and 1mm to to width.
Supports and protects your JustBoom Amp and Raspberry Pi
Leaves all ports accessible
Designed and made in the UK from high quality material
Easy to open case allows for quick access to your Amp and Raspberry Pi boards
No tools are needed for assembly or disassembly
High speed data transfer up to 5 Gbps
Compatible for Windows ME, 2000, XP, Vista, WIN 7 and Mac OS with USB interface
Fast transfer rate for reliable copy/download/backup
Powers via USB port, no additional power supply needed
No additional driver installation required
Renders the touch screen and Pi board portable
Wall mount features
Four screw fixings supplied for attachment to the touch screen
Cut-outs for all connections
Easy clip rear cover to protect/access all internal connectors
Supports lithium battery charging
Ergonomic design and easy to use
High-performance bluetooth controller for Playstation and Raspberry Pi
Bluetooth handle on line distance up to 10M
Built In Rechargeable Lithium Ion battery pack
The display included in this offering is a 1.44" diagonal and 128 x 96 resolution true ePaper / eInk graphical display.
ePaper reflects light just like ordinary paper and is capable of holding text and images indefinitely, even without electricity.
ePaper is a display technology that mimics the appearance of ink on paper.
170 tie points arranged in 34 rows of 5 pins.
Modular clip function - rapidly snap and unsnap boards and circuits as your project grows
Weight: 38.9g
Self-adhesive backing.
3.5cm x 4.5cm
Advanced power management
USB plug-and-play receiver
Multi-OS support: Windows, Mac OS, Android and Linux
Powered by 2 x AAA batteries
Compatible with LibreElec out of the box
CamJam EduKit #3 is focused on robotics
Detect objects in front of your robot and follow line courses
Create your very own Raspberry Pi-powered robot
Set Descending Direction

Items 1-20 of 76

Page