Raspberry Pi

Raspberry Pi
Set Descending Direction

20 Items

Consistent board format
Added connectivity
10x faster processing
Consistent board format
Third generation Raspberry Pi
Small 5 button joystick
Barometer: 260 1260 hPa absolute range (accuracy depends on the temperature and pressure, +/- 0.1 hPa under normal conditions)
Temperature sensor (Temperature accurate to +/- 2 degC in the 0-65 degC range)
(N.B. Since the board heats up, the temperature readings from these sensors are not going to accurately reflect ambient temperature)
Gyroscope - angular rate sensor: +/-245/500/2000dps
Extended 40-pin GPIO header
Full-size HDMI
4 USB 2.0 ports
1GB LPDDR2 SDRAM
Power-over-Ethernet (PoE) support (requires separate PoE HAT)
Colour: Black
Length: 1m
HDMI 2.0 with Ethernet and audio return channel
Triple layer shielding for better performance from WiFi and Bluetooth connectivity of Raspberry Pi 3
Officially licensed by the Raspberry Pi foundation
For the Raspberry Pi Zero / Pi Zero W
Gold plated connectors for flawless signal transference
Mini HDMI Male to HDMI Female
CE and ROHS Compliant
HDMI plug to HDMI plug leads
Length: 2m
Colour: White
Triple layer shielding for better performance from WiFi and Bluetooth connectivity of Raspberry Pi 3
Compatible with Raspberry Pi 3 and all previous Raspberry Pi models
Integrated Fan Control and 25mm x 25mm Brushless Fan
Fully Isolated Switched-Mode Power Supply (SMPS)
Output Voltage: 5V
Power over Ethernet (PoE) 802.3af Compliant
Output Current: Up to 2.5A
ErP level 6 efficiency rating
Suitable for use with all Raspberry Pi boards
Interchangeable heads for different regions
1.5m micro USB B Lead
50,000 hours MTBF
Raspberry Pi TV uHAT follows the new uHAT form factor of HAT.
Allows you to receive digital terrestrial TV broadcast systems which includes DVB-T and DVB-T2 on a Raspberry Pi!
The TV uHAT can be used on all Raspberry Pi boards when running as a back-end server for other devices on the network.
Doubles the memory to 512MB
Uses up to 45% less power than a Model B+.
56mm long, 12mm thick
Connects to the Raspberry Pi board via a short ribbon cable (supplied)
Optical size of 1/4"
1.4m X 1.4m pixel with OmniBSI technology for high performance (high sensitivity, low crosstalk, low noise)
Weight just over 3g
Uses the Sony IMX219PQ image sensor - high-speed video imaging and high sensitivity
Officially licensed by the Raspberry Pi foundation
Compatible with Raspberry Pi 3 and all previous Raspberry Pi models
Triple layer shielding for better performance from WiFi and Bluetooth connectivity of Raspberry Pi 3
HDMI plug to HDMI plug leads
Length: 1m
All you need to get started with your Pi Zero camera project
The cable is flexible and durable
This camera cable is 3.8cm
Length: 2m
Colour: Black
Officially licensed by the Raspberry Pi foundation
Triple layer shielding for better performance from WiFi and Bluetooth connectivity of Raspberry Pi 3
Colour: Black
ErP level 6 efficiency rating
Output Power Max: 13W
Suitable for use with all Raspberry Pi boards
Output Power Max: 13W
Output Current: 2.5A
1.5m micro USB B Lead
Suitable for use with all Raspberry Pi boards
50,000 hours MTBF
Interchangeable heads for different regions
ErP level 6 efficiency rating
For the Raspberry Pi Zero / Pi Zero W
Micro USB B (Male) to USB A (Female)
CE and ROHS Compliant
OTG On-The-Go Host Cable
This camera cable is 15cm.
All you need to get started with your Pi Zero camera project
The cable is flexible and durable.
Cut-outs for all connection points and MicroSD card cut-out
Plastic LED light protector
Colour: Raspberry Space Grey and Black
5 part enclosure
External Dimensions: Length 96mm , Width 71mm, Depth 26mm
Colour: Raspberry Red and White
External Dimensions: Length 96mm , Width 71mm, Depth 26mm
Plastic LED light protector
Cut-outs for all connection points and MicroSD card cut-out
Stick on rubber feet for stability
Set Descending Direction

20 Items