HATs

Set Descending Direction

Items 1-10 of 13

Page

Pi Supply PaPiRus HAT Case

A clear transparent top allows you to keep an eye on your ePaper project
Can be wall mounted
4 button actuators allow you to use the programmable buttons on the PaPirus HAT without the need to open up the case
All ports on the PaPiRus HAT and Raspberry Pi are accessible
Comes with 4 x rubber feet

Raspberry Pi Sense HAT

Barometer: 260 1260 hPa absolute range (accuracy depends on the temperature and pressure, +/- 0.1 hPa under normal conditions)
Small 5 button joystick
Relative Humidity sensor (accurate to +/- 4.5% in the 20-80%rH range, accurate to +/- 0.5 degC in 15-40 degC range)
Temperature sensor (Temperature accurate to +/- 2 degC in the 0-65 degC range)
(N.B. Since the board heats up, the temperature readings from these sensors are not going to accurately reflect ambient temperature)

RasPiO Pro Hat Protect/Position Raspberry Pi Ports Perfectly

Requires no soldering or assembly
Python library included in Raspbian
Includes a 170pt mini-breadboard to build your circuits on
Works "out of the box" with GPIO Zero - the new easy-to-use
Protects the Pi's ports in case you make a wiring error

Pi Supply PaPiRus ePaper / eInk Screen HAT for Raspberry Pi - Multi Screen

The display included in this offering is a 1.44" diagonal and 128 x 96 resolution true ePaper / eInk graphical display.
ePaper is a display technology that mimics the appearance of ink on paper.
ePaper reflects light just like ordinary paper and is capable of holding text and images indefinitely, even without electricity.

Pi Supply Flick HAT - 3D Tracking & Gesture HAT for Raspberry Pi

Also works with Raspberry Pi Zero, Zero Wireless and all other Raspberry Pis with 40 GPIO pins (or compatible boards).
Full software libraries (fully open-source code)
Touch and Tap sensing
Communicates with the Raspberry Pi via I2C
No soldering required

Pi Supply Traffic HAT for Raspberry Pi

Programmable in almost every language usable on the Pi. As long as it can output to the GPIO it will work!
Scratch GPIO Support using the addon "TrafficHAT". Great for beginners!
GPIO / BCM Numbers for each component written on board for quick reference. Great for teaching using RPi.GPIO!
No extra libraries or software is required apart from that to control GPIO Pins.

Pi Supply JustBoom Amp HAT

Includes both a DAC and power amplifier - just connect to your passive speakers
Back-powers the Raspberry Pi over the GPIO (with full HAT compliant protection) at 2.5A so only one power supply required for the whole system.
Optional IR receiver for the JustBoom Raspberry Pi Amp is included in package
JustBoom Player pre-configured software available on SD cards from various vendors
2 x 55 Watt peak output at 8 ohms (2 x 30 Watt RMS)

Pi Supply JustBoom Digi HAT

Output transformer for galvanic isolation
JustBoom Player pre-configured software available on SD cards from various vendors
Fully HAT compliant
Plug and play compatibility for ease of use
No soldering required

Raspberry Pi Power over Ethernet (PoE) HAT

Class 2 Device
Input Voltage: 36V - 56V
Output Voltage: 5V
Power over Ethernet (PoE) 802.3af Compliant
Integrated Fan Control and 25mm x 25mm Brushless Fan

Pi Supply Pi PoE Switch - Power Over Ethernet for the Raspberry Pi

Power over ethernet add-on board for the Raspberry Pi
Power your Raspberry Pi and provide an Ethernet connection in any location with just a single cable.
Brings the Pi Supply Switch technology together with PoE all in one fantastic package
Perfect for removing the clutter of wires and for reliable use in remote locations.
Set Descending Direction

Items 1-10 of 13

Page