Raspberry Pi

Set Descending Direction

Items 1-10 of 49

Page

Raspberry Pi Camera Board v2.1 (8MP, 1080p)

Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system
Size 25mm x 23mm x 9mm
Improved resolution - 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
Fixed focus lens on-board
Works with any version of the Raspberry Pi or compute module

Pi Supply Raspberry Pi Touch Screen Case - Clear

Four screw fixings supplied for attachment to the touch screen
Wall mount features
Renders the touch screen and Pi board portable
Camera board connector slot
Cut-outs for all connections

Raspberry Pi Raspberry Pi 3 Model A+

Doubles the memory to 512MB
Uses up to 45% less power than a Model B+.
56mm long, 12mm thick

AB Electronics ADC Pi

Jumper selectable I2C addresses
On-Board Programmable Gain Amplifier (PGA): Gains of 1, 2, 4 or 8
Based on the MCP3424 from Microchip Technologies Inc
Single Ended full-scale range of 5.0V
On-board 2.048V reference voltage (Accuracy 0.05%, Drift: 15 ppm/C)

Raspberry Pi 3 Model B+

Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
4 USB 2.0 ports
Extended 40-pin GPIO header
Full-size HDMI

ASUS Tinker Board S

2GB of LPDDR3 dual-channel memory
Single board computer (SBC) that offers greater durability and better stability
HDMI CEC hardware circuit implemented, with the supported software, allows multimedia enthusiasts to control TV outputs using a single remote control
Gbit LAN for Internet and network connectivity
Quad-core ARM-based processor the Rockchip RK3288

Raspberry Pi 3 Model B

Third generation Raspberry Pi
Low cost
10x faster processing
Consistent board format
Added connectivity

Pi Supply JustBoom Amp

No soldering required
Plug and play compatibility for ease of use - just connect to your passive speakers
When stacked on the JustBoom DAC it can backpower the DAC board, and when stacked on the JustBoom DAC HAT it can backpower both the DAC HAT and the Raspberry Pi too (at the 2.5A for full Pi3 compatibility)
Onboard, hardware jumpers for configuring output voltage and gain settings (jumpers could optionally be changed with switches)
Full high-quality audio - 192kHz / 24bi

Pi Supply SNESPi Raspberry Pi Gaming Bundle with Retro Gamepads

Turns the Raspberry Pi into a fully fledged DIY games console
Relive your childhood memories with the ultimate retro Raspberry Pi gaming bundle
Includes the classic SNESPi Case and two NES classic styled gamepads

Pi Supply Raspberry Pi 3 Model B+ Case with Cooling Fan - White

Material: ABS
Comes combined with an optional cooling fan
Compatible with the Raspberry Pi Model 3B+/3/2
Set Descending Direction

Items 1-10 of 49

Page