PCI & PCIe Cards

Set Descending Direction

15 Items

Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps
Ships with a full profile bracket install, low profile included
Port Multiplier FIS-based and Command-based switching supported
Twice the speed of SATA II (3Gbps)
Supports RAID 0 and 1 modes
Compliant with PCI Express Base Specification 1.0a
Standard and low profile bracket included allowing install into almost any system
Use existing parallel devices with PCI Express systems saving the cost and hassle of upgrading peripherals to work with newer systems
SPP/EPP/ECP Parallel port fully supports existing Centronics interface
Supports SPP, EPP and ECP communication modes for maximum compatibility with your parallel peripherals
Utilizes a native PCI Express chipset design rather than a bridge chip, ensuring a fast, reliable and cost-effective FireWire expansion
Add 3 FireWire ports to a standard or small form factor (SFF) computer with support for high-powered FireWire devices
Backed by a StarTech.com lifetime warranty and free lifetime technical support
One 6-pin FireWire 400 port, each with transfer rates up to 400Mbps
Two 9-pin FireWire 800 ports, each with transfer rates up to 800Mbps
Standard and low profile bracket included ensuring easy installation into almost any system
Native single-chip, single lane PCI Express offers increased speed and reduced CPU load by up to 48%
Two high speed RS-232 serial ports with data transfer rate up to 460.8 Kbps
Data transfer rates of up to 460 Kbps for peak serial device performance
Compliant with PCI Express base specifications revision 1.0a
Data transfer rates of up to 460 Kbps for peak serial device performance
Native single-Chip, single lane PCI Express offers increased performance, for up to 48% less cpu load
128-byte deep FIFO per transmitter and receiver
Pre-configured for Low profile systems but includes a full profile bracket for versatility
Automated in-band software flow control using programmable Xon/Xoff in both directions
Includes both standard and low profile/half-height brackets, which makes this the perfect card for any application, including small form factor embedded applications
Breakout cable design means that only one expansion slot is needed, to add 4 additional serial ports to any system
Includes a full profile and low profile/half-height bracket
Native single chip design
Lower CPU load of native single-chip, single lane PCI Express design ensures optimal system performance (up to 48% less CPU load)
Leverage SSD performance and standard HDD capacity with HyperDuo technology
Maximize system capability with SATA III connection speeds
Supports HyperDuo SSD auto-tiering
4 AHCI SATA III (6Gbps) ports through PCI Express x2
Fit any standard or low profile chassis with included brackets
High Performance Dual Channel Oxford 950 UART provides reliability, speed and broad OS compatibility
8 high speed RS-232 serial ports with data transfer rate up to 460.8 Kbps
Breakout dongle cable included
The included breakout cable helps to reduce cluttered connections
Native single-Chip, single lane PCI Express design reduces overall load on the CPU
Four high speed RS-232 serial ports with data transfer rate up to 460.8 Kbps
High Performance Dual Channel Oxford 950 UART
Data transfer rates of up to 460 Kbps for efficient serial device performance
Native single-Chip, single lane PCI Express offers increased performance and reduces CPU load by up to 48%
Pre-configured for low profile systems but includes a full profile bracket for added versatility
Native single-Chip, single lane PCI Express offers increased performance, for up to 48% less cpu load
Data transfer rates of up to 460 Kbps for efficient serial device performance
Pre-configured for standard profile systems but includes a low profile bracket for versatility
Includes low profile/half height mounting bracket
Four high speed RS-232 serial ports with data transfer rate up to 460.8 Kbps
Extend your system capabilities by adding 7 USB 3.0 ports – 6 external and 1 internal – to any PCIe compatible computer
Backward compatible with USB 2.0 and 1.x devices
Enjoy fast file transfers with USB 3.0 5Gbps and UASP support
Unique dual-profile design fits standard and low-profile computers
SATA power connector with up to 900mA per port for high-power USB devices
Native single-chip, single lane PCI Express chipset delivers true PCIe performance
Standard and low profile/half-height bracket included to ensure fitment in any system
Easy to install and use with full step-by-step instructions saving time and hassle
Two high speed RS232 serial ports with support for data transfer rates up to 460.8 Kbps
Compliant with PCI Express base specifications revision 1.0a
Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
PXE network boot
Add four 10/100/1000 RJ-45 Ethernet ports to a client, server or desktop through one PCIe slot
Auto MDIX support
Intel I350-AM4 chipset with Intel® Virtualization Technology for connectivity
Compatible with x4 PCIe 3.0 motherboards, and backward compatible with PCIe 2.0 and PCIe 1.0
OS independent with no drivers required, for a fast, hassle-free setup
Boost system speed and performance by adding a PCIe NVMe U.2 SSD to your PC
Simplify system builds with a U.2 to PCIe adapter that mounts your SSD directly to the adapter, with no need for adapter cables
PCI Express 3.0 x4 lane host adapter
Power high-powered USB devices as necessary, with the optional LP4 power connector
Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design
Provides two external USB 3.0 ports with UASP support
Increase efficiency of your USB 3.0 devices with up to 5 Gbps of bandwidth
Supports data rates up to 5 Gbps
Set Descending Direction

15 Items