• ADSL & VDSL2 (FTTC/BT Infinity) Ethernet Modem
  • BT SIN 498 MCT Approved
  • VDSL Vectoring
  • Bridge (pass) a single IP address or a whole public subnet
  • IPv6 and IPv4 Compatible
  • Ethernet Connection for client device (router, PC etc.)
  • Support for MTU1508 (Jumbo Frames)
  • ADSL & VDSL Parameters pre-set for UK ISPs (adjustable)
  • Ideal Partner device for DrayTek dual-WAN products or any other vendor's Ethernet WAN firewall

The DrayTek Vigor 130 VDSL2/ADSL Modem is a VDSL2 and ADSL modem with an Ethernet connection; it is not a router but a true ADSL/VDSL Ethernet Modem (bridge). It provides proven compatibility with UK VDSL2 and ADSL technologies; extensively tested and tuned to provide a robust and reliable DSL connection.

By providing a direct bridge between the DSL connection and Ethernet, the connected device (firewall, router or PC) can log into the Internet (your ISP) directly and have full control over the Internet connection - that makes the Vigor 130 a unique product.

You can add VDSL2 and ADSL connectivity to any Ethernet-WAN router simply by connecting up the DrayTek Vigor 130 modem.

Other Ethernet 'modems' may use workarounds to get a public IP address 'through' to your secondary device/client, requiring non-standard operation and complicated dual-stage setup (modem logs in, router routes) but the Vigor 130 provides the secondary device with a real routed IP connection and the ability to fully manage the connection, making setup easy. In most cases, the Vigor 130 needs no setup or configuration - just plug it in and set up your PC or router. All login/ISP details are entered on the connected client device, not the Vigor 130. The actual connection to your ISP is still PPPoA or PPPoE (depending on your ISP and line type).

This transparent bridging method also differs from using a normal ADSL/VDSL router which logs in itself and then uses NAT or multiple public IP addresses to create an onward client connection for your secondary device; that is not IP Address thrifty and can introduce secondary NAT compromises or interference with various protocols/traffic. With the Vigor 130 bridge/modem, you get a true single public IP address (or multiple, if you have them) straight through to your firewall/router.

Line Info in Vigor Router Interface

When connected to a DrayTek Vigor router, DSL line information is displayed in the router's own web interface, alongside any built-in DSL interface stats.

Form FactorExternal Modem
In The BoxVigor 130 Modem, RJ-45 Cable (Ethernet), RJ-11 to RJ-11 cable, UK-type power adaptor, Quick Start Guide
Dimensions18.2cm (W) x 12.5cm (D) x 4.0cm (H)
Interface Port1 x RJ-45
ADSL Interface1 x RJ-11
Protocols Supported?ITU-T G.993.1 VDSL; ITU-T G.993.2 VDSL2; ITU-T G.997.1; VDSL Annex A, Annex C, Annex M; VDSL Profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a; VDSL Vectoring; OLR, UPBO, DBPO, US0; ANSI T1.413 Issue 2; ITU-T G.992.1 G.dmt (ADSL); ITU-T G.992.2 G.lite; ITU-T G.992.3 ADSL2; ITU-T G.992.5 ADSL2+; ADSL Annex L (READSL); ADSL Annex M; PPPoA-PPPoE or PPPoE-PPPoE Bridging (WAN to LAN); RFC-2684 / RFC-1483
Ethernet StandardsGigabit 10/100/1000BaseT Ethernet (auto-sensing/MDI-X)
Power Adaptor TypeExternal
Voltage/Power/Frequency100 to 240VAC
EnvironmentalOperating Temperature 0 to 40C - Humidity 20 to 90%