Set Descending Direction

Items 1-10 of 13


Pi Supply PaPiRus HAT Case

Can be wall mounted
4 button actuators allow you to use the programmable buttons on the PaPirus HAT without the need to open up the case
All ports on the PaPiRus HAT and Raspberry Pi are accessible
Comes with 4 x rubber feet
A clear transparent top allows you to keep an eye on your ePaper project

Raspberry Pi Sense HAT

Small 5 button joystick
Temperature sensor (Temperature accurate to +/- 2 degC in the 0-65 degC range)
Relative Humidity sensor (accurate to +/- 4.5% in the 20-80%rH range, accurate to +/- 0.5 degC in 15-40 degC range)
Barometer: 260 1260 hPa absolute range (accuracy depends on the temperature and pressure, +/- 0.1 hPa under normal conditions)
(N.B. Since the board heats up, the temperature readings from these sensors are not going to accurately reflect ambient temperature)

RasPiO Pro Hat Protect/Position Raspberry Pi Ports Perfectly

Requires no software installation
Protects the Pi's ports in case you make a wiring error
Includes a 170pt mini-breadboard to build your circuits on
Works "out of the box" with GPIO Zero - the new easy-to-use
Requires no soldering or assembly

Pi Supply PaPiRus ePaper / eInk Screen HAT for Raspberry Pi - Multi Screen

ePaper reflects light just like ordinary paper and is capable of holding text and images indefinitely, even without electricity.
ePaper is a display technology that mimics the appearance of ink on paper.
The display included in this offering is a 1.44" diagonal and 128 x 96 resolution true ePaper / eInk graphical display.

Pi Supply Flick HAT - 3D Tracking & Gesture HAT for Raspberry Pi

Also works with Raspberry Pi Zero, Zero Wireless and all other Raspberry Pis with 40 GPIO pins (or compatible boards).
Full software libraries (fully open-source code)
Touch and Tap sensing
Gesture sensing up to 15cm
Communicates with the Raspberry Pi via I2C

Pi Supply Traffic HAT for Raspberry Pi

No extra libraries or software is required apart from that to control GPIO Pins.
Scratch GPIO Support using the addon "TrafficHAT". Great for beginners!
GPIO / BCM Numbers for each component written on board for quick reference. Great for teaching using RPi.GPIO!
Programmable in almost every language usable on the Pi. As long as it can output to the GPIO it will work!

Pi Supply JustBoom Amp HAT

JustBoom Player pre-configured software available on SD cards from various vendors
Mounting hardware included
Unused GPIO pins still accessible via a populated extension header
Back-powers the Raspberry Pi over the GPIO (with full HAT compliant protection) at 2.5A so only one power supply required for the whole system.
Includes both a DAC and power amplifier - just connect to your passive speakers

Pi Supply JustBoom Digi HAT

Output transformer for galvanic isolation
JustBoom Player pre-configured software available on SD cards from various vendors
Fully HAT compliant
Compatible with JustBoom Player / OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others
Compatible with Raspberry Pi Zero v1.3 and Wireless (and also compatible with the Raspberry Pi A+,B+, 2B, 3B and the new 3B+ (and also compatible with the Raspberry Pi Zero, but we would recommend the JustBoom Digi Zero for this purpose)

Raspberry Pi Power over Ethernet (PoE) HAT

Class 2 Device
Input Voltage: 36V - 56V
Output Voltage: 5V
Power over Ethernet (PoE) 802.3af Compliant
Integrated Fan Control and 25mm x 25mm Brushless Fan

Pi Supply Pi PoE Switch - Power Over Ethernet for the Raspberry Pi

Power over ethernet add-on board for the Raspberry Pi
Power your Raspberry Pi and provide an Ethernet connection in any location with just a single cable.
Perfect for removing the clutter of wires and for reliable use in remote locations.
Brings the Pi Supply Switch technology together with PoE all in one fantastic package
Set Descending Direction

Items 1-10 of 13