Set Descending Direction

13 Items

Pi Supply PaPiRus HAT Case

4 button actuators allow you to use the programmable buttons on the PaPirus HAT without the need to open up the case
Can be wall mounted
Comes with 4 x rubber feet
A clear transparent top allows you to keep an eye on your ePaper project
All ports on the PaPiRus HAT and Raspberry Pi are accessible

Raspberry Pi Sense HAT

Small 5 button joystick
Barometer: 260 1260 hPa absolute range (accuracy depends on the temperature and pressure, +/- 0.1 hPa under normal conditions)
Temperature sensor (Temperature accurate to +/- 2 degC in the 0-65 degC range)
(N.B. Since the board heats up, the temperature readings from these sensors are not going to accurately reflect ambient temperature)
Gyroscope - angular rate sensor: +/-245/500/2000dps
£37.00
Free Delivery

RasPiO Pro Hat Protect/Position Raspberry Pi Ports Perfectly

Works with any 40-pin Raspberry Pi
Arranges the Pi's ports in numerical order to make tinkering easier
Gives you direct access to the ports if you need it
Requires no soldering or assembly
Python library included in Raspbian

Pi Supply PaPiRus ePaper / eInk Screen HAT for Raspberry Pi - Multi Screen

The display included in this offering is a 1.44" diagonal and 128 x 96 resolution true ePaper / eInk graphical display.
ePaper is a display technology that mimics the appearance of ink on paper.
ePaper reflects light just like ordinary paper and is capable of holding text and images indefinitely, even without electricity.
£69.99
Free Delivery

Pi Supply Flick HAT - 3D Tracking & Gesture HAT for Raspberry Pi

Also works with Raspberry Pi Zero, Zero Wireless and all other Raspberry Pis with 40 GPIO pins (or compatible boards).
Communicates with the Raspberry Pi via I2C
No soldering required
Fully CE and FCC tested and approved
One line installer

Pi Supply Traffic HAT for Raspberry Pi

No extra libraries or software is required apart from that to control GPIO Pins.
GPIO / BCM Numbers for each component written on board for quick reference. Great for teaching using RPi.GPIO!
Scratch GPIO Support using the addon "TrafficHAT". Great for beginners!
Programmable in almost every language usable on the Pi. As long as it can output to the GPIO it will work!

Pi Supply JustBoom Amp HAT

Mounting hardware included
Unused GPIO pins still accessible via a populated extension header
2 x 55 Watt peak output at 8 ohms (2 x 30 Watt RMS)
JustBoom Player pre-configured software available on SD cards from various vendors
Back-powers the Raspberry Pi over the GPIO (with full HAT compliant protection) at 2.5A so only one power supply required for the whole system.
£60.00
Free Delivery

Pi Supply JustBoom Digi HAT

All Raspberry Pi GPIO pins still accessible via 40pin unpopulated extension header
Mounting hardware included
Fully HAT compliant
JustBoom Player pre-configured software available on SD cards from various vendors
Output transformer for galvanic isolation
£30.00
Free Delivery

Raspberry Pi Power over Ethernet (PoE) HAT

Integrated Fan Control and 25mm x 25mm Brushless Fan
Fully Isolated Switched-Mode Power Supply (SMPS)
Output Voltage: 5V
Power over Ethernet (PoE) 802.3af Compliant
Output Current: Up to 2.5A

Pi Supply Pi PoE Switch - Power Over Ethernet for the Raspberry Pi

Power over ethernet add-on board for the Raspberry Pi
Power your Raspberry Pi and provide an Ethernet connection in any location with just a single cable.
Perfect for removing the clutter of wires and for reliable use in remote locations.
Brings the Pi Supply Switch technology together with PoE all in one fantastic package
£33.00
Free Delivery

Pi Supply PaPiRus ePaper / eInk Screen HAT for Raspberry Pi - Large (2.7")

The display included in this offering is a 1.44" diagonal and 128 x 96 resolution true ePaper / eInk graphical display.
Reflects light just like ordinary paper and is capable of holding text and images indefinitely, even without electricity.
ePaper is a display technology that mimics the appearance of ink on paper.
Daylight readable and is very high contrast.
All signals are broken out to a 40 pin female header.
£40.99
Free Delivery

Pi Supply PaPiRus ePaper / eInk Screen HAT for Raspberry Pi - Medium (2.0")

ePaper is a display technology that mimics the appearance of ink on paper.
The display included in this offering is a 1.44" diagonal and 128 x 96 resolution true ePaper / eInk graphical display.
All signals are broken out to a 40 pin female header.
Daylight readable and is very high contrast.
Reflects light just like ordinary paper and is capable of holding text and images indefinitely, even without electricity.
£38.99
Free Delivery

Pi Supply PaPiRus ePaper / eInk Screen HAT for Raspberry Pi - Small (1.44")

ePaper is a display technology that mimics the appearance of ink on paper.
ePaper reflects light just like ordinary paper and is capable of holding text and images indefinitely, even without electricity.
The display does not require any power to keep the image
The display included in this offering is a 1.44" diagonal and 128 x 96 resolution true ePaper / eInk graphical display.
All signals are broken out to a 40 pin female header.
£35.99
Free Delivery
Set Descending Direction

13 Items

HATs