Raspberry Pi

Set Descending Direction

Items 1-20 of 52

Page
Comes combined with an optional cooling fan
Compatible with the Raspberry Pi Model 3B+/3/2
Material: ABS
Inspired by SNES/NESPi Design
Large cooling fan installed with 2 pin GPIO connector
Dimensions: 120 mm x 100 mm x 37 mm
Full access to SD Card, USB, Ethernet, Power adapter, and HDMI connector without opening the case
Colour: Grey
NES Case that is specifically designed for Raspberry Pi 3B+/3B/2B
Air ventilation can be installed inside the upper enclosure
RetroPie software
Safe Shutdown and Safe Reset
Functional LED power indicator
1 micro USB port for power supply
1Ghz, Broadcom BCM 2835 single-core processor
On-board Wireless LAN - 2.4 GHz 802.11 b/g/n (BCM43438)
40-pin GPIO connector (same pinout as A+/B+/2B)
Compatible with existing HATs
The brightness of the LEDs is fully controllable using the onboard LED driver chip.
The Bright Pi will allow you to control any ~5v LEDs using the I2C interface on the Raspberry Pi, so you could substitute the provided LEDs with colourful LEDs.
The Bright Pi has M2 mounting holes
Plugs directly into the I2C interface on the Raspberry Pi
Leaves all ports accessible
Leaves Raspberry Pi status LEDs visible
Access to buttons and LEDs on the PiJuice HAT
Designed and made in the UK from high-quality material
No tools are necessary for assembly or disassembly
Comes with a 40 pin GPIO stacking header
Compatible with the Pi Zero
No tools are needed for assembly or disassembly
Supports and protects your JustBoom Amp Zero and Pi Zero
Access to micro SD port
Leaves all ports accessible
Designed and made in the UK from high quality material
Supports and protects your JustBoom Digi Zero and Pi Zero
Compatible with the Pi Zero
Easy to open case allows for quick access to your Digi Zero and Pi Zero
Gap for camera cable
Leaves all ports accessible
Designed and made in the UK from high quality material
Access to microSD port
No tools are needed for assembly or disassembly
4 x rubber feet included
Smooth black finish that blends in with any audio setup
Designed and made in the UK from high quality material
Leaves all ports accessible
Access to micro SD port
3 Part Clip Case
SD Card Slot
Fits the Raspberry Pi B+/2/3
Black Gloss Case with Transparent HAT Cover
Dimensions: 63.9mm x 93.5mm x 26.6mm
Cable exits for camera module and optional knock-out parts for extra cable exits if you need them
Access to buttons and LEDs on the PiJuice HAT
No tools are necessary for assembly or disassembly
Designed and made in the UK from high-quality material
Leaves all ports accessible
The microSD comes preloaded with custom software
Foundation Edition is available in USB Flash and USB Hard Drive versions.
Ideal storage solution for Raspberry Pi
Full high-quality audio - 192kHz / 24bi
Onboard, hardware jumpers for configuring output voltage and gain settings (jumpers could optionally be changed with switches)
Mounting hardware included
Plug and play compatibility for ease of use - just connect to your passive speakers
When stacked on the JustBoom DAC it can backpower the DAC board, and when stacked on the JustBoom DAC HAT it can backpower both the DAC HAT and the Raspberry Pi too (at the 2.5A for full Pi3 compatibility)
Supports and protects your JustBoom Amp and DAC
Designed and made in the UK from high quality material
No tools are needed for assembly or disassembly
Easy to open case allows for quick access to your Amp and DAC
Smooth red finish
Access to micro SD port
Leaves all ports accessible
No tools are needed for assembly or disassembly
Designed and made in the UK from high quality material
4 x rubber feet included
Compatible with the Raspberry Pi 3, 2, and B+
Supports and protects your JustBoom Amp and Raspberry Pi
Designed and made in the UK from high quality material
Easy to open case allows for quick access to your Amp and Raspberry Pi boards
Smooth red finish
Easy to open case allows for quick access to your Amp and DAC
Designed and made in the UK from high quality material
Leaves all ports accessible
4 x rubber feet included
Smooth black finish that blends in with any audio setup
Works with any Raspberry Pi with an infrared (IR) receiver.
Powered by 2 x AAA batteries
Operating range up to 10 metres
Works with LIRC and other programmable IR receiver software.
12 essential buttons for an audio or media player system.
Compatible with the Pi Zero
Supports and protects your JustBoom Digi Zero and Pi Zero
No tools are needed for assembly or disassembly
Access to micro SD port
Smooth black finish that blends in with any audio setup
Set Descending Direction

Items 1-20 of 52

Page