• A compact relay perfect for projects and models
• Solder or plug into a relay base with eight spade connectors
• 10A switching capacity
• 12V coil voltage
• Double pole double throw design
• Model code: S8L-12VDC-2CSUse a relay to control two channels
With this double pole double throw (DPDT) relay you can switch between two outputs in two channels simultaneously. You can use relays to control a more powerful circuit from a less powerful circuit. This relay has a maximum switching power of 2400VA and has a 12V coil voltage. With its transparent cover, you can check on your relay and its smaller size at 21mm x 27.3mm x 35mm lets you add it to even more projects. Add this relay to your projects quickly and easily, with its spade terminals you can solder and connect with spade sockets (not included) or you can plug it into a compatible relay base (not included Order Code A12WZ). The relay has an operating time of 15ms and a release time of 10ms.
Connect up to four outputs
Switch between the normally closed (NC) and normally open (NO) terminals on each of the two channels. This double pole double throw relay works like two single pole double throw relays letting you connect to two completely separate circuits. Before the relay has power the common connector is connected to the normally closed connector, closing this circuit. If the relay is then powered the connection breaks with the normally closed terminal, and switches to the normally open terminal closing this side of the circuit and making it the active output, if the power is then stopped the connection reverts back to the normally closed terminal.