• A compact relay perfect for projects and models
• Solder or plug into a relay base with eight spade connectors
• 15A switching capacity
• 12V coil voltage
• Single pole double throw design
• Model code: S8L-12-1CSControl a higher powered circuit with a relay
Use a relay to control a higher powered circuit from a lower powered one to change the direct ion of a motor or switch from one LED to another. This single pole double throw (SPDT) relay lets you switch between two outputs. With is spade connecters it’s easy to connect this relay into your projects and models by soldering or using a compatible relay socket (not included Order Code A12WZ). You can fit this relay into even more projects with its smaller 21mm x 27.3mm x 35mm size and because of its transparent cover you can see the relays condition at a glance. This relay runs off 12V and has a maximum switching power of 3600VA with an operating time of 15ms and a release time of 10ms.
Switch between two outputs
This single pole double throw relay uses two spade connectors linked together for the common, normally open (NO) and normally closed (NC) terminals. When the relay is powered the normally open terminals are connected to the common, activating this side of the circuit. When the relay is not powered the common switches to the normally closed terminals, activating this side, while breaking the normally open connection, deactivating it.