Find similar products here

12V DC 1A DPDT Miniature Relay

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N04AW

£2.99

About this product

Overview

  • 12V DC 1A DPDT Miniature Relay
  • Designed for direct PCB mounting and can be mounted in a standard 16 pin DIL socket
  • High sensitivity, low power consumption

Product overview

  • 12V DC 1A DPDT Miniature Relay
  • Designed for direct PCB mounting and can be mounted in a standard 16 pin DIL socket
  • High sensitivity, low power consumption
  • 1000mA maximum current

High sensitivity, low power consumption BT type 47 equivalent relay, which is designed for direct PCB mounting & can also be mounted in a standard 16 pin DIL socket (Order Code BL19V).

Specification

Operating Specifications

Maximum Current:

1000mA

Operating Time:

4ms

Release Time:

2ms

Contact Resistance:

50 MΩMΩ

Electrical Life:

200000 Cyclescycles

Mechanical Life:

1.0E7cycles

Construction

Contact Material:

Gold overlay silver alloy

What is the range of input voltage please?

Asked by: David17
This is 5V - 120V
Answered by: Russell
Date published: 2016-09-05

DC switching current at 12V DC?

Asked by: Jonathan
This would be suitable from 40ma up to 1 amp.
Answered by: Russell
Date published: 2016-03-08

1. The relay coil will work on a nominal 12v dc circuit. Is there a problem if the coil voltage increases to 13.8 v dc? 2. Do you know the current drawn by the coil as this is not specified. I assume that it is in the order of 12-15ma

Asked by: CTR1
This will work fine, the current drawn is approximately 15ma.
Answered by: Dominic
Date published: 2015-07-17

Do you have a dataheet for this product?

Asked by: Pritpal
Yes we do - I will email this info to you directly. For any Manual/Datasheet requests please email technical@maplin.co.uk directly.
Answered by: DaveB
Date published: 2015-07-17

Does the 5vdc refer to the minimum voltage of the input switch for this to work? Sorry, beginner's question.
Asked by: Elliot
Yes, that's correct.
Answered by: DH
Date published: 2015-07-17

hi i have a "Omron G5A-234P-53/1 4.5DC" relay that needs replacing will this one do the job?
Asked by: Luke
No sorry this product does not support that.
Answered by: JK
Date published: 2015-07-17

Hi can you use this with a PIR to switch a 12v circuit
Asked by: Burt
Yes the product does support that.
Answered by: DH
Date published: 2015-07-17

Is this relay suitable for low power Radio frequency circuit i.e. Antenna changeover from receive to transmit. One pole for Voltage change over and one pole for antenna changeover.
Asked by: Jim Gallagher
No sorry this product does not support that.
Answered by: JK
Date published: 2015-07-17
  • y_2017, m_12, d_11, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_GB, sid_N04AW, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads