Find similar products here

12V LED SPST Toggle Switch Blue

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N36FB

£2.99

Delivery Options

Same day with

Prices Vary

Next day delivery Order online by 6pm

£ 5.99

Named day or time delivery

from £ 8.99

Free Standard delivery 3-5 days (on orders over £10)

Free

Standard delivery 3-5 days (on orders under £10)

£ 2.99

See full details of delivery Options

About this product

Overview

  • SPST toggle switch with a blue LED in the end of the toggle
  • Illuminated when the switch is in the ‘on’ position
  • Rated at 20A @ DC 12 V

Product overview

• SPST toggle switch with a blue LED in the end of the toggle• Illuminated when the switch is in the ‘on’ position• Rated at 20A @ DC 12 V • Requires a 12.2mm diameter cut-out

Rated 5 out of 5 by from simple on/off switch I wired this yesterday, very easy to use and the blue LED matches the other components installed - very pleased
Date published: 2017-03-09
  • y_2017, m_11, d_19, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_GB, sid_N36FB, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Specification

Specifications:
Switch rating: 20A, DC 12 V
Contact rating: 50mΩ maximum
Insulation: DC 500 V, 100MΩ minimum
Dielectric strength: AC 1000 V for 1 minute
Circuit: 3P SPST OFF-ON(LED)
Body size: 24.4 x 14 x 14mm
Bush length: M12 x 11mm long
Dolly: 23.2mm x 7mm

Do you have circuit diagram? Want to use as direction indicator on model car, Is center tag common with power input to either side?

Asked by: Toylander
Unfortunately we do not have a diagram for the item .
Answered by: darren cordon
Date published: 2017-08-09

What is the forward voltage of the LED? (All would be nice but this one alone will do) and would I want to use a current limiting resistor after it to be on the safe side?

Asked by: GazE
The voltage of the LED is rated at 12v also
Answered by: Billy
Date published: 2017-06-16

how is the LED powered. Does it need a separate positive and negative supply distinct from the switched connections?

Asked by: pwbrooke
The LED is powered through the switch connections.
Answered by: Billy
Date published: 2017-03-01

how should this switch be wired?

Asked by: jack
Unfortunately, we are unable to give any wiring advice on DIY products.
Answered by: Dominic
Date published: 2017-02-16

I see that the LED is rated for 20 Amps @12 Volts, can you advise if the LED would be damaged by using 24 volts, even if it is at a very low current (less than 1 amp draw)

Asked by: Anonymous
It is likely to cause damage to the LED if you put 24V through it instead of 12V.
Answered by: Billy
Date published: 2015-12-17

Are you sure the light comes on in the ON position?  Under these circumstances the switch is a short circuit, so where does the current through the led go?  Are you sure it doesn't come on in the OFF position?

Asked by: PeterL
If connected correctly the LED will illuminate when the switch is in the ON position.... The LED is used to indicate that the circuit is ON.
Answered by: Les
Date published: 2017-02-28

Will the pins of this package allow for use in a breadboard?

Asked by: Alex
I am sorry but the item in question does not support use in your intended application.
Answered by: Russell
Date published: 2015-07-17

is this switch possible in 250 v AC 16 A and in different colours 

Asked by: clarkey
I am sorry but the item in question does not support use in your intended application.
Answered by: Russell
Date published: 2015-07-17
  • y_2017, m_11, d_19, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_GB, sid_N36FB, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads