Find similar products here

130W Variable Speed Rotary Tool and 172 Piece Accessory Set

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N03FY


Delivery Options

Same day with

Prices Vary

Next day delivery Order online by 6pm

£ 5.99

Named day or time delivery

from £ 8.99

Free Standard delivery 3-5 days (on orders over £10)


Standard delivery 3-5 days (on orders under £10)

£ 2.99

See full details of delivery Options

About this product


Product overview

• Drills, cuts, sharpens, cleans, polishes and engraves most surfaces
• Ideal hobby and craft tool
• Variable speed control: 8,000-33,000rpm
• Spindle lock to easily change accessories
• Includes 172 accessories for multipurpose use
• Supplied in a wall mountable or free standing handy storage case

Rated 3 out of 5 by from Manual? As others have said previously the instruction manual is more than a little thin, can you provide a URL with a proper manual in PDF?
Date published: 2015-05-09
Rated 4 out of 5 by from These tools are wonderful, if used as they should be they are just the ticket and I was amazed at the amount of tools in the box that were actually useful unlike some where you only use a few and the rest don't get touched. A great buy.
Date published: 2014-11-18
Rated 2 out of 5 by from Good price but don't believe the total amount of tools. Also can anyone tell the difference between stainless steel polish and brass polish without a bit of help from the manufacturer?
Date published: 2014-11-18
Rated 4 out of 5 by from Runs well - good price The first time of using I was impressed with the variable speed and the quietness. However, I was cutting a piece of skirting board carefully with a cutting disk. Suddenly, the mandrel shank bent at about 45 degrees. Scary at high speed. Impressed that the cutting blade didn't break - which often happened with my dremel battery powered machine. Haven't used it long enough to rate for using for hours though! A lot of people have complained here about the lack of a manual. Mine came with a very comprehensive manual, so that problem has been sorted. Maplin replaced the item with no question when they saw the bent mandrel - so well done Maplin! The carrying box is a bit of a challenge as the clip to hold it closed is not very reliable, so be prepared for it to pop open - or just tie something round it for carrying. One of the reasons I chose this item is that it has 4 separate chuck spindles. I watched a lot of YouTube films on this and other tools before I even bought it - these helped with setting everything up perfectly. The quick lock is perfect. Would have liked a finger release button for when it is running - as in, remove finger and tool stops - as when my mandrel bent it was a bit scary to turn speed down and switch off as it wildly spun. I think I need to get some stronger mandrels! Good value for money tool. Others probably are as well - both cheaper and more expensive! (Dremels have good carry cases) Review is only 4 instead of 5 star due to these small problems.
Date published: 2016-06-27
Rated 2 out of 5 by from Could be much improved I bought this to help with a project that required sanding/grinding mainly. The instruction "manual" was ridiculously inadequate and doesn't list what the hits are or what they could be used for so I'm basically left googling what they're used for. The cutting discs are also very fragile. Not sure if this is a common thing with all of these multi tools but I found that when sanding I got covered in all the dust coming off thanks to the direction of the rotation
Date published: 2015-05-17
Rated 4 out of 5 by from Useful toolset that I will be using for home projects.
Date published: 2014-11-18
Rated 5 out of 5 by from godd product easy ordering fast dispatch good service
Date published: 2014-11-18
Rated 5 out of 5 by from Got this for my boyfriend for Christmas (he did ask for it) he is extremely happy with it and works as he expected :)
Date published: 2014-11-18
  • y_2017, m_10, d_20, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_20
  • loc_en_GB, sid_N03FY, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb


Cordless: No
Variable Speed: Yes
Type: Rotary Tool
Motor Voltage: 230V
Minimum to Maximum RPM 8,000 to 33,000rpm
Colour: Black & Grey
Product Width: 265mm
Product Depth: 65mm
Product Height: 315mm
Product Weight: 1610g

Can this be used to remove grouting?

Asked by: Ursuls
Yes, I am pleased to advise this product will do exactly as you require.
Answered by: Dominic
Date published: 2017-09-30

Does this rotary tool have a keyless chuck ?

Asked by: fiona
Unfortunately we cannot list every part that comes with the kit.
Answered by: Dale
Date published: 2017-09-11

The hobby drill you have my son bought for me a year ago it's brilliant, but I do need a new chuck on it. Please would u let me know where I can squire one please. Thank you.

Asked by: Janey
On this occasion, Maplin does not stock a product that exactly meets your requirements, or indeed anything close enough to offer you as an alternative.
Answered by: Dominic
Date published: 2017-09-05

Hi will this tool allow me to cut neat square slots in a 1mm thick steel dome shaped lampshade? Thanks

Asked by: blowfelt
Unfortunately we are unable to guarantee full compatibility for this item in your intended application, I am sorry for any inconvenience this may cause you.
Answered by: darren cordon
Date published: 2017-08-14

I bought this Everise rotary tool years ago. Very happy with it but the collet nut broke, any ideas where I can get a replacement? I tried the Dremel one but it doesn't fit.

Asked by: alexamelines
Unfortunately we do not have a spare part for the item .
Answered by: darren cordon
Date published: 2017-07-24

What is the smallest diameter drill shank that the chuck will grip

Asked by: droodels
The shank diameter of cutters is 3.15mm 2. the dressing stone SI carbide has no shank, and the dimension is 25.4*9.5*9.5mm
Answered by: Dominic
Date published: 2017-07-19

Is there a tool to cut glass?

Asked by: Dixie1002
Yes, this is provided with the item.
Answered by: Dominic
Date published: 2017-05-11

Can I get a PDF copy of the manual

Asked by: Curtis
Unfortunately, we have no copy of this on file but the item is not provided with an intensive user manual.
Answered by: Dominic
Date published: 2017-05-02
  • y_2017, m_10, d_20, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_46
  • loc_en_GB, sid_N03FY, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb