Find similar products here

2 Way Phono Selector Switch

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: CN44X

£4.99

About this product

Overview

Product overview

This attractively designed selector uses a push button switch to select the active channel to feed into an output which could be an amplifier.Uses RCA phono sockets as its inputs and comes complete with two RCA phono plugs at the outputs.

1. Where is the switching button located? 2. How long is the output cable? 3. Are there any holes for hanging/fixing on this unit?
Asked by: John (Technical)
1. The Button is on the backside of this unit, if you look at the unit front ways on with the 4 black and red inputs the button is on the opposite side to that. 2. The Cable is 1.2m in length. 3. There is no mountable holes on the bottom of the unit for hanging/fixing.
Answered by: JH
Date published: 2016-07-21

does this switch two devices to one single amp input ,
Asked by: phil
Yes the product does support that.
Answered by: DH
Date published: 2015-07-17

Is there a version of this switch with 1/4" jack plugs / sockets rather than phono plugs / sockets?
Asked by: John Brooks
No sorry
Answered by: JK
Date published: 2015-07-17

Can I connect the phono plugs into my sky plus box phono outlets,& switch the signal to one of two different pieces of equipment ?
Asked by: Jack Smith
Yes the product does support that.
Answered by: JK
Date published: 2015-07-17

Could I use this to connect two amplifiers to one pair of speakers?
Asked by: Gerry
Yes the product does support that.
Answered by: DH
Date published: 2015-07-17

Would it be possible to remove the switch from the box and add wires to extend it to a remote location? (I want to put the switch box in the boot of a car but the actual button for it on tha dashboard)
Asked by: Cerberus
Unfortunatatley, we are unable to advise on the modification of our items.
Answered by: JK
Date published: 2015-07-17

There is an output cable shown in the picture, ending in 2x phono (RCA) plugs. Is the other end of this cable which goes into the box hardwired, or is the output available as 2x phono sockets, and the lead in the picture is detachable?
Asked by: Hamish
Hard wired and not removeable I'm afraid
Answered by: JK
Date published: 2015-07-17

Can you tell me what the dimensions of this are? I am working in an extremely tight space to put this in. Thank you.
Asked by: Jon
Approx 60 x 40 x 20 mm
Answered by: GM
Date published: 2016-07-21
  • y_2017, m_10, d_20, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_GB, sid_CN44X, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads