• A compact relay perfect for projects and models
• Solder or plug into a relay base with eight spade connectors
• 10A switching capacity
• 240V coil voltage
• Single pole double throw design
• Model code: S8L-240VAC-2CSSwitch between two outputs in two channels
This double pole double throw (DPDT) relay lets you control multiple outputs from one relay. Relays allow you to control a higher powered circuit from a lower powered one. Connect this relay to your project easily with its spade terminals, that you can connect directly to or use a compatible relay base (not included, Order Code A12WZ) to make changing relays even quicker. With its smaller size, 21mm x 27.3mm x 35mm, it can fit into more projects and you can see through the transparent cover to check on your relays condition. Running off 240V AC this relay has a maximum switching power of 2400VA, an operating time of 15ms and a release time of 10ms.
Control outputs simultaneously
Switch between a normally closed (NC) and normally open (NO) terminal across two channels at the same time. Each channel has a common, a normally open and a normally closed terminal, to let you control two completely independent systems. The common is connected to the normally closed terminal when there is no power to the relay and switched to the normally open terminal when there is power. When the connection switches it breaks one circuit and makes the other circuit, changing which output is active.