Find similar products here

2V, 6V and 12V Sealed Lead Acid Battery Charger

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: L06AB

£19.99

Was £29.99

Save £10.00

Delivery Options

Same day with

Prices Vary

Next day delivery Order online by 6pm

£ 5.99

Named day or time delivery

from £ 8.99

Free Standard delivery 3-5 days (on orders over £10)

Free

Standard delivery 3-5 days (on orders under £10)

£ 2.99

See full details of delivery Options

About this product

Overview

  • Suitable for charging 2 V, 6 V and 12 V batteries
  • Automatically switches to trickle charge once battery is full
  • LED indicator shows charging state

Product overview

• Suitable for charging 2 V, 6 V and 12 V batteries• Automatically switches to trickle charge once battery is full• LED indicator shows charging state• 1 switch with 3 modes to select appropriate charge for correct voltage battery• Short circuit and reverse polarity protection

A plug-in charger suitable for 2 to 12 V sealed lead-acid type batteries up to 9 Ah. Connect the leads to the battery terminal and the LED lights to show correct charging. At the end of the charge cycle the current decreases to a trickle charge at constant voltage, to keep the battery fully charged, and the LED starts to flash. One switch with 3 settings to set to the type of battery you are charging, either 2, 6 or 12 V.

Rated 1 out of 5 by from Didn't work. Bought this to charge the battery for or intruder alarm. Battery on charge for almost a whole week. Still not charged. Light to show charging spotted working after about3 days - battery still dead. Buying a new battery instead tomorrow which is only a little more expensive than this pointless charger. Returning this straight away. A complete waste of £30, the electricity used and a week of my house being vulnerable.
Date published: 2015-04-12
Rated 1 out of 5 by from Avoid if you want wasted journeys I bought one to charge a 6 v and a 12 v child's toy car battery and it didnt work. Took it back and got an exchange. This did not work either. I used a multimeter to test it and no current running through. Changed the fuse and tested fuse and still no joy. Will be taking back for a full refund.
Date published: 2015-12-08
Rated 5 out of 5 by from Went beyond the call of duty I bought this in an emergency as a cheap way to put a small amount of charge into my electric car's 12V 75Ah auxiliary battery so that I could turn the key the following day and have the car ready itself and charge the remainder. Despite only being rated for charging batteries up to 9Ah (something I missed on the packaging but it is there) and despite my battery being a flooded (not sealed) lead acid unit, this little charger brought the battery from an empty 9.5V up to 13V in about 6 hours, which was just enough juice to get me out of trouble. The unit did get warm whilst charging at the maximum 0.6A but I kept it near the window with a cool breeze blowing, monitoring it to ensure it didn't overheat. I don't recommend this method but I was impressed how it coped with a task that was clearly far beyond what it was designed to do. I ensured there was sufficient ventilation near the ceiling to avoid hydrogen gas buildup whilst charging.
Date published: 2016-01-03
Rated 1 out of 5 by from USELESS brought this unit saturday 19th march returned the very next day didnt charge my 12v battery over a period of 24hrs
Date published: 2016-03-20
  • y_2017, m_11, d_18, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_GB, sid_L06AB, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Specification

Input voltage: 230 Vac
Output voltages:
2 V battery 2.3 V @ 900 mA
6 V battery 6.9 V @ 700 mA
12 V battery 13.8 V @ 600 mA
Dimensions: 106 x 68 x 51 mm

is it a constant voltage charger

Asked by: pothole
Yes it is a constant voltage charger.
Answered by: Billy
Date published: 2017-11-06

Can I use this to charge your amino micro 12v 1.3ah batteries or is there an alternative lower cost charger

Asked by: Pipw
This service is for frequently asked questions and does not allow two way communication, In order for us to best assist you with your technical issue please contact us on the details below: 0333 400 9500 or email technical@maplin.co.uk
Answered by: Dominic
Date published: 2016-12-21

Does this charger plug straight into the mains socket or does it have a mains lead with a plug on the end?

Asked by: Peter352
Their is a mains lead attached to the transformer, so the bulk of the transformer can be placed on a stable surface.
Answered by: Gareth
Date published: 2016-03-11

does this charger have a polarity indicator? if so what does it mean when this light is on constantly?

Asked by: leigh321
If the red polarity light is on this is showing the is connected in the incorrect way - the green light should be on and solid or flashing when nearly full.
Answered by: Dominic
Date published: 2015-08-18

Is it AC or is it DC?

Asked by: Mezziii
The input is AC, the output is DC.
Answered by: PaulaC
Date published: 2015-07-17

I have a two LED PIR lights running from a 12v battery charged by solar panel. The panel isn't keeping the battery charged in winter Could I leave this charger permanently connected as well as or instead of the solar panel? Thanks
Asked by: James Ford
Yes you could connect it instead of the solar.
Answered by: DB
Date published: 2015-07-17

Hi if i had 2 6volt 7ah batteries in series would this charger be suitable?
Asked by: Chris Harrington
Yes the product does support that.
Answered by: DH
Date published: 2015-07-17

Would this charger be suitable for a 6v 1.2Ah SLA battery?
Asked by: Keith Woods
Yes the product does support that.
Answered by: DH
Date published: 2015-07-17
  • y_2017, m_11, d_18, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_GB, sid_L06AB, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads