Find similar products here

75W DC Variable Voltage Bench Power Supply

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: GW02C

£24.99

Was £84.99

Save £60.00

About this product

Overview

  • DC 0 - 30V (2.5A), fixed DC 5 and 12V (0.5A) outputs
  • Separate analogue voltmeter and ammeter
  • Current can be limited from 0 to 2.5A using the ‘current’ control.

Product overview

• DC 0 - 30V (2.5A), fixed DC 5 and 12V (0.5A) outputs• Separate analogue voltmeter and ammeter• Current can be limited from 0 to 2.5A using the ‘current’ control.• Fixed outputs through ‘snap-on’ terminals and variable supply available at pair of terminal posts• Overload and short circuit protected

Rated 5 out of 5 by from Good solid power suppy, with great features. I bought two of these and as I have had almost identical units before, I knew they were going to be OK. I like the analogue meters, and the ability to set a current limit.
Date published: 2017-07-07
Rated 5 out of 5 by from Nice traditional power supply. I have been very pleased with this power supply. I had been looking for one for a while now, but didn't want to pay about a £100 for one. At this bargain price, you have to buy it ! It's a very good product and nicely made, and does everything I wanted.
Date published: 2017-09-23
  • y_2017, m_11, d_17, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_GB, sid_GW02C, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Specification

Operating Specifications

Output Voltage:

30 VV

Output Current:

2500mA

Regulated Output:

Yes

Efficiency:

60%

Line Regulation:

10mV

Load Regulation:

10mV

Ripple & Noise:

5mV

Dimensions & Weight

Width:

130mm

Depth:

150mm

Height:

225mm

Weight:

5250g

Product Specifications

Reversible Polarity:

No

Is this a switched mode supply or a pure analogue / linear supply? Will it be able to supply 5v with 2.5amps

Asked by: MGM1956
Yes, you would be able to do 5v at 2.5 Amps with this device.
Answered by: Dale
Date published: 2017-10-01

Can you use the 5v fixed and the 0-30v outputs at the same time? What would be the current limit(s)?

Asked by: Mark
I'm afraid it is only single voltage on each , below are current limits : Output Voltage: DC 0 - 30V (2.5A max) DC 5V (0.5A max) DC 12V (0.5A max)
Answered by: Neil G
Date published: 2017-08-16

Can this unit be used as a rectifier for copper plating and electroforming.

Asked by: Clubhead
Unfortunately we are unable to guarantee full compatibility for this item in your intended application, as this is not the manner for which it was designed to be used.
Answered by: Les
Date published: 2016-06-01

Can I connect the negative terminals of the three outputs together, so that all three outputs share a common negative rail?
Asked by: bob
Yes this will be fine
Answered by: DH
Date published: 2017-09-23

Are all three outputs available simultaneously?
Asked by: Colin
Yes the product does support that.
Answered by: JK
Date published: 2016-08-30

Is the 0 - 30v dc output regulated
Asked by: Bob
Yes that is correct
Answered by: DM
Date published: 2015-07-17

Are the 5V and 12V outputs voltage regulated and current limit protected?
Asked by: Kerry Green
Unfortunately not.
Answered by: DH
Date published: 2017-09-23

can it be adjusted for mAmps
Asked by: Donald
Yes it can
Answered by: LC
Date published: 2015-07-17
  • y_2017, m_11, d_17, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_GB, sid_GW02C, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads