Web only

Find similar products here

AD 13 Solderless Breadboard

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: BZ16S

£19.99

Our delivery options

Free standard delivery (orders over £10)
3-5 working days 9am-5pm
FREE
Standard delivery (orders under £10)
3-5 working days 9am-5pm
£2.99
Next day delivery
Mon - Fri, order by 6pm
From £5.99
Specific day/time delivery
Choose am / pm OR before 9am / 10.30am
From £5.99
Same day delivery with Shutl
Choose a 1 hour time slot
Prices vary

Specific options for this product are available in the checkout. Read more delivery information

About this product

Overview

  • Three AD-01 solderless breadboards mounted on the AD-10 base board
  • 5 individual screw terminals to accept 4mm banana plugs, stripped wire or a 4.5mm Y-terminal
  • additional matrix of 30 by 6 sockets for non-DIP based components

Product overview

  • Three AD-01 solderless breadboards mounted on the AD-10 base board
  • 5 individual screw terminals to accept 4mm banana plugs, stripped wire or a 4.5mm Y-terminal
  • additional matrix of 30 by 6 sockets for non-DIP based components

A range of solderless breadboard modules that can interconnect to suit individual requirements. The basic board AD-01 consists of four blocks of six columns of 28 rows, the sockets in each row being interconnected. The blocks are a standard DIP size apart, although MSI and LSI type chips can be used. At both ends of the blocks, there are two power busses. The ‘Red’ bus is made up of two separate rows of 12 connecting sockets, and the ‘Black’ bus is one row of 24 connecting sockets

There is an additional matrix of 30 by 6 sockets for non-dip type components. The six sockets in the vertical plane are interconnected. Each socket will accept solid wire from 20 to 30 swg (0•3 to 0•8mm). The base has a ‘sticky’ covering to hold the board firm on a workbench or surface. The AD-10 power block has 5 individual screw terminals that will accept 4•5mm Y-terminal, stripped wire or 4mm banana plug. Each terminal is connected to two sockets. The power block will snap lock onto the AD-01 base board to allow connections to the required power bus. The power block has the same ‘sticky’ base. After use the modules can be unlocked and remade into a different configuration.

AD-13 is three AD-01 and one AD-10 mounted on a blue base board. Size: 265 x 168mm

Downloads