Find similar products here

Amplifier Wiring Kit

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: NB52G

£19.99

Our delivery options

Free standard delivery (orders over £10)
3-5 working days 9am-5pm
FREE
Standard delivery (orders under £10)
3-5 working days 9am-5pm
£2.99
Next day delivery
Mon - Fri, order by 6pm
From £5.99
Specific day/time delivery
Choose am / pm OR before 9am / 10.30am
From £5.99
Same day delivery with Shutl
Choose a 1 hour time slot
Prices vary

Specific options for this product are available in the checkout. Read more delivery information

About this product

Overview

  • Complete kit suitable for installing a two channel amplifier rated up to 300W
  • High quality cables
  • Includes fuse holder and terminals

Product overview

• Complete kit suitable for installing a two channel amplifier rated up to 300W
• High quality cables
• Includes fuse holder and terminals

Superb quality cables; this kit contains everything that you need to install a two channel amplifier rated up to 300W. Supplied complete with instructions.

Power Lead (Red)
For connection between the positive input of your amplifier and the positive terminal of your car
battery. The fuse holder should be secured to the vehicle and the fuse of the appropriate rating
fitted, dependent on your amplifier’s requirements. The lead is pre-terminated with ring terminals
for ease of connection.

Earth Lead (Brown)
For connection between the negative input on your amplifier and a secure ground on the vehicle’s
bodywork or chassis.

Remote Lead ( Thin blue)
For connection between your car radio/CD player’s remote output connector and the remote
terminal on your amplifier. The lead is pre-terminated for ease of use.

OFC Twin Phono Lead (Blue)
For connection between your car radio/CD player’s phono (RCA) line level output and the phono
(RCA) L and R input on your amplifier.

OFC Speaker Cable (Transparent blue and un-terminated)
For connection between the speaker outputs of your amplifier and your selected car speakers.
Spade terminals are provided to make the connection once the cable has been cut to length.

Rated 4 out of 5 by from Seems to be a pretty decent kit to be honest. Pros - - Good quality cable and insulation - In line fuse holder is good quality - Good quality fuse - Comes with a lot of spade ends for amp to speaker Cons - - Ring terminals on earth cable are very thin so could be hard to find a place to fit them - Ring terminal on earth cable is too wide to fit to standard amplifier terminal blocks - Would be good to have 4 of each large and small crimp speaker ends as some speakers have 2 large spade terminals rather than a small and a big. Over all the wiring and the fuse holder were great. Earth cable was alright but not the best. Speaker wire is good but would be good to have 4 of each large and small spade connectors.
Date published: 2014-11-11
  • y_2017, m_11, d_23, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_NB52G, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

how long are wires ?

Asked by: Martini
5m red 10AWG power cable 1m black 10AWG ground cable 5m OFC twin phono ( RCA ) 6m 16 AWG OFC speaker cable
Answered by: Dominic
Date published: 2016-05-09

will this support a 200 watt amp 4 channel cheers mark
Asked by: mark green
Yes the product does support that.
Answered by: DH
Date published: 2015-07-17

does it come with instructions ?
Asked by: sam
no it is just a cable pack (wiring is done via you amp instructions etc)
Answered by: DM
Date published: 2015-07-17

How come the wiring kit with 10 AWG is rated at 300W and the 8 AWG kit is 800W
Asked by: NobbyonDaNET
8 AWG wire is thicker than 10 AWG wire so will carry more current. (The lower the AWG number, the thicker the cable)
Answered by: GM
Date published: 2015-07-17

Is this good for a 200W amp (100W per channel) that takes a 30Amp fuse?
Asked by: Eddie Wattenbach
Yes this will be suitable.
Answered by: TJ
Date published: 2015-07-17

what is the remote switch cable for??
Asked by: Benji
it is so that the radio turns the amp on when it is turned on.
Answered by: TJ
Date published: 2015-07-17

does this work with that 640watt amp bundle with 2 6x9's and 2 door speakers
Asked by: kraig
No sorry this product does not support that.
Answered by: CF
Date published: 2015-07-17

can u make up a kit that can handle a 300w amp with all the gear from ur 14.99 kit for the same price??
Asked by: george hope
This is for 300 watt
Answered by: GM
Date published: 2015-07-17
  • y_2017, m_11, d_23, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_GB, sid_NB52G, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads