Atlas SCR100 Thyristor and Triac Analyser

£53.99

About this product

Overview

  • Meter capable of analysing triacs and thyristors
  • Generates gate currents from 100uA up to 90mA
  • Gate sensitivity category displayed

Product overview

• Meter capable of analysing triacs and thyristors
• Generates gate currents from 100uA up to 90mA
• Gate sensitivity category displayed
• Requires one AAA battery (included)
• Measures just 103mm x 70mm x 20mm

What is this analyser for?
The Atlas SCR100 is specifically designed to automatically analyse a wide range of Triacs and Thyristors (SCRs). It identifies the component type and the pinout while the gate sensitivity is displayed as one of nine sensitivity categories.

How easy is this meter to use?
The SCR100 is very easy to use – it will automatically detect whether the component is a thyristor or a triac and can be connected either way round. All you need to do is connect the component to the probes and press the test button.

Specification

Parameter Minimum Typical Maximum
Peak test current into S/C 100mA 120mA
Peak test voltage across O/C 11.0V 12.0V 12.5V
Gate trigger current range (IGT) 0.1mA 90mA
Gate voltage resolution (VGT) 20mV
Battery voltage range 0.8V 1.5V 1.7V
Low battery warning 1.1V
Inactivity power-down period 25 seconds
Operating temperature range 10°C 35°C

Downloads