• Wirelessly trigger fog output from your Chauvet fog machine, such as your Chauvet Hurricane fogger
• Can be used at a distance of 30.5m away, so you can be standing a good distance away
• Plugs into the dedicated 5-pin DIN wireless port on the fog machine and is powered from the port
• Four selectable channels allow you to manipulate four fog machines separatelyWhat can I achieve with this wireless remote?
If you’re looking for an easy way to control your fog machine, you can with this wireless remote controller. The remote compatible with Chauvet fog machines, for example Chauvet’s Hurricane fogger range. Two LED indicators on the receiver tell you when the fog machine is heating up and when it is ready to output fog. This allows you to see from a distance when the fog machine is ready. While the party is in full swing, press the fog button on the transmitter and the fog machine will output for however long you press the button. The remote can reach up to 30.5m away, and the maximum continuous fog output time is dependent on your fog machine.
Can I control more than one fog machine?
Four dipswitches on the side of the receiver allow you to select the channel you want each fog machine to be on. This means that you can control four fog machines independently if you use separate receivers for additional fog machines (only one supplied). You could control even more machines if you run the fog machines simultaneously, by selecting the same channel on each machine.
Is this wireless remote easy to set up?
Supplied with everything you need to start controlling one fog machine, this wireless remote controller is simple to set up. First, plug the wireless receiver into the dedicated wireless controller 5-pin port on the fog machine. Since the receiver is powered directly from the port, an extra plug isn’t needed which saves you space. Next, assign the receiver to the channel you want and then to activate the fog machine (once ready) press the corresponding channel number on the transmitter. The back of the receiver is magnetic and a keychain is included for the transmitter, so you can keep track of both parts.