Find similar products here

CiT Shade Micro ATX PC Case with 500W Power Supply Black

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N90LK

£44.99

About this product

Overview

Product overview

• All-Black interior for sleek finish
• Micro-ATX form factor
• Two 5.25" External Bays
• Black PSU to complete the look
• 500W PSU with 12cm fan included
• Vented side panels for extra ventilation
• Three internal 3.5" Bays
• HD audio, mic & 2 x USB 2.0

Introducing the new CiT Black series Micro-ATX mesh gaming range. Every case in the black series comes with mesh front, black interior and a 500w black 12cm PSU as standard. With Micro ATX Motherboard support and HD Audio, these cases pack a massive punch for an unbeatable price.

Rated 5 out of 5 by from Decent Office PC Case Having looked around for a decent but cheapish case to build a dozen office PCs I came across this. As office PC cases go it does the job. The cases were stable and nicely finished. I admit the PSU is lightweight so only time will tell but there were enough connectors for a basic office machine (the odd connector pin was loose but was easily fixed by pushing back in). With everything installed it showed itself to be a quiet case. Overall the case is better than quite a few budget cases I have investigated to date. This is a basic case so don't expect too much, I wouldn't use it for a home build but for the office it seems adequate.
Date published: 2014-03-09
Rated 5 out of 5 by from CiT shade this is an excellent case for anyone building a compact gaming rig or office machine because it has great ventilation because there is room for a 120mm fan in the front and side panel. it also comes with a 500 watt psu that is ok quality and would be fine for a low power system (300 watts or so) but would avoid using for gaming and use a good psu brand like: silverstone enermax thermaltake OCZ antec or corsair The included 80mm fan is not great but helps cool the cpu when mounted in the space on the side panel. overall it is a great little case for the money if a tiny bit flimsy but seems to become more solid when everything is mounted inside.
Date published: 2013-12-20
Rated 2 out of 5 by from Bought this case to transplant some old components into to build a windows 98 retro rig to play old/classic games on so wasn't intending on spending a whole lot of money as I already have a high end PC for my current gaming & media use. Out of the box you could tell that this case and PSU are budget items, the metal the case is made out of is very thin and the case itself seems quite wobbly but it does stiffen up a little once you start screwing in the mobo and drives. It does however accomodate my mobo, hard drive, floppy and cd drive adequately (althought the case's original mobo plug array blanking pannel took some effort getting out and left razor sharp burrs which I cut my finger on so watch out for that!). A bit of a gripe also was that there isn't very many connectors with the included PSU as there is only just enough for the basics - if you're looking to power a graphics card as well you'll need a 4 pin molex to 4 or 6 pin gfx card plug to power it as there isn't one provided! All in all, for getting my cheap old rig up and running it was worth it, although I have no idea how long the PSU is going to last, it seems quite light for a 500w PSU and doesn't inspire a whole lot of confidence but again, for the price and the fact that this machine will only recieve occasional use I guess I can let it slide. If you are looking for a product that will last & to accomodate a decent rig for current media & gaming use however, I would definitely avoid this and go for a better case and PSU. Also be careful tightening up screws in the chassis and panels as the 'metal' this case is made out of has the same tensile properties as water. For a budget/infrequent use setup however or if you need something to tide you over in a pinch then it will do.
Date published: 2013-01-26
Rated 5 out of 5 by from Great little case I've had this case for a year and a half and it has never let me down. It has a solid design, whilst being strong and compact enough to be put in a car and taken to a friends house. The power supply has enough power (500 watts) to run mid to high end components. Highly recommend as a cheap first case for a pc builder.
Date published: 2015-05-14
Rated 4 out of 5 by from Good value for money. My only criticism is that the cable between the two SATA power headers is a bit short, making it a bit tricky installing a hard drive if there is a DVD drive in the top slot.
Date published: 2013-11-02
Rated 5 out of 5 by from Just the job! Bought this to re-house the innards of my Dell Inspiron 530s after the power supply failed. Could use more than two SATA power connector, but aside from that, it's a great product at a good price. Everything connects easily and works. Dell front panel card reader clips into the front. The rest of the motherboard connectors are accessible at the back. Looks good too.
Date published: 2014-01-09
Rated 3 out of 5 by from Good Used this for my first gaming pc which I had to do on a budget. PSU is fine although you need to buy some adapters if you want more hard drives, graphics cards etc. Also the front panels which are removable to put in DVD drives and card readers are really hard to put back in after you've taken them out. I do like the case though
Date published: 2014-02-16
Rated 3 out of 5 by from Ok, I guess This case is a good budget case however the psu seems very light for a 500 watt and the fan in it seems to randomly vibrate. The front of this case is hard to get back on if it is removed, it also leaves a sharp edge if you remove the pci slot blanks
Date published: 2016-01-10
  • y_2017, m_10, d_17, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_GB, sid_N90LK, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Specification

Form Factor: Micro ATX
Motherboard Support: Micro ATX
PSU Support: Standard ATX
Gaming Case: Yes
Water Cooling Ready: No
Dimensions (mm): 180mm x 360mm x 425mm (W x H x D)
Body Material: 0.5mm SECC
Front Bezel Material: Plastic, Mesh
Side Panel: Vented
External Bays: 2 x 5.25" External Bays, 2 x 3.5" External Bay
Internal Bays: 3 x 3.5" Internal Bays
Drive Bay Notes: 2 x 5.25" Bays, 5 x 3.5" Bays Total
Expansion Slots: 7 Full Size
Cooling Front: Space for 1 x 12cm Fan (Not Included)
Cooling Top: None
Cooling Rear: 1 x 8cm Fan
Cooling Side: Space for 1 x 8cm Fan and 1 x 12cm Fan (Not Included)
Cooling Bottom: None
IO Ports: 2 x USB 2.0, 1 x HD Audio, 1 x Microphone
Front Bezel Colour: Black
Body Colour: Black
PSU Included: Yes - 500W PSU with 12cm Fan
Net Weight (KGs): 5.5Kg

Which gaming motherboards can fit in this case? How do you screw in the mother board? Are there screws in the case already?

Asked by: Luke Cowen
Any Micro ATX ones. For installation advice please research this online you can fin my videos online.
Answered by: Dominic
Date published: 2017-05-25

does the PSU come with cables

Asked by: john1950
This will have a cable for the PSU.
Answered by: Darren
Date published: 2016-10-11

Does the case's power supply have support for this motherboard bundle? http://www.maplin.co.uk/p/sniper-i3-6100-cpu-4gb-ram-silver-motherboard-and-processor-bundle-a02uu

Asked by: lukebutler111
Yes, I am pleased to advise the item will support this use.
Answered by: Dominic
Date published: 2016-07-19

Can you provide an instruction manual for this case?

Asked by: Thomas
There is no instruction manual for this type of item unfortunately.
Answered by: Darren
Date published: 2016-02-14

will this case fit the asus a88x gaming motherboard?

Asked by: theboss
The ASUS website states that the A88-Gamer uses a standard ATX Form Factor design 12 inch x 9.0 inch ( 30.5 cm x 22.9 cm ) This is a MICRO ATX case, unfortunately an ATX motherboard is not going to fit.
Answered by: Les
Date published: 2015-09-02

what make of power supply is in this case

Asked by: josh
This is a unbranded power supply.
Answered by: Russell
Date published: 2015-08-24

What size is the front fan mount

Asked by: AffectedArc07
There's space for a 92mm at the back, 120mm and 80mm on the side, also a space for a 120mm at the front (I believe) 
Answered by: Smarty092
Date published: 2015-07-17
  • y_2017, m_10, d_17, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_GB, sid_N90LK, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads