Find similar products here

Einhell BT-EW150V Electric Welder with Adjustable Current

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A74RZ

£63.99

About this product

Overview

Product overview

• Adjustable welding current
• Thermostat with a pilot lamp
• The earth terminal and the electrode holder are permanently connected to the welder
• User-friendly transportation carry-handle

The Einhell BT-EW 150V Electric Welder is a compact, handy tool which is ideal for occasional small welding, such as joining flat and angled steels, pipes and much more. Thanks to the adjustable welding current, the power can be adjusted to suit the particular task.
The Welder has a thermostat with a pilot lamp which helps to protect the BT-EW 150 against overheating. Both the earth terminal and the electrode holder are permanently connected to the welder. For user-friendly transportation there is a practical carry-handle.

Rated 5 out of 5 by from Fantastic for beginners! The instructions were very clear and easy to understand, the product feels solid in your hands and the wires are a good thickness. It is so easy to use that even I, a complete beginner, was able to strike an arc the first try.
Date published: 2017-04-06
  • y_2017, m_10, d_18, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_A74RZ, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

Specification

Specifications:
Fuse: 16Ah
Welding Current: 40 - 80Ah
No Load Voltage: 48 Volt
Electrode Diameter: 1.6 - 2.5mm
Weight: 11.23kg

How do I know what amperage the welder is set to? The dial doesn't seem to have an indicator beside an arrow getting larger

Asked by: Callum
The range of the welder should be 40-80A, unfortunately, on this model there is no numerical display, instead the increase will be proportional to the rotation of the hand wheel as covered in section 6 on page 11 of the manual linked below. http://52.50.15.149/Downloads/user-manual-10622
Answered by: Gareth
Date published: 2017-04-08

What is the maximum thickness of steel this could weld together?

Asked by: Callum
Unfortunately this information has not been provided by the manufacturer.
Answered by: Billy
Date published: 2017-04-07

Do you sell supplies for this welder? ie the welding rod?

Asked by: geon
Hi Darren, thank you for answering. What use or application does this item support then? Is it for display only?
Answered by: geon
Date published: 2017-01-12

Is this classed as an ARC welder?

Asked by: MAPFAN
Yes, I am pleased to advise the item will support this use.
Answered by: Dominic
Date published: 2017-01-03

hi Maplin!- I want to create a mesh with 0.1mm thick steel wires, welded at all the cross points. would this kit be able to do that?

Asked by: AndyK
I am sorry but the item in question does not support use in your intended application
Answered by: Dominic
Date published: 2017-05-13
  • y_2017, m_10, d_18, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_GB, sid_A74RZ, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads