Find similar products here

Electrically Conductive Silver Paint

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: N36BA


About this product


  • Pure silver is used in the formulation to give excellent conductive properties and a hard resilient surface film
  • Simple to apply
  • Highly conductive

Product overview

• Pure silver is used in the formulation to give excellent conductive properties
and a hard resilient surface film• Simple to apply• Highly conductive• Tough surface film• Supplied in a 3G phial• Dry's in 15 to 30 minutes

Typical applications include making electrical connections on circuit boards, providing radio frequency interference shielding, repairing broken track on PCBs, repairing demisters on car rear windows, bonding wires together, conductive ink and many more. Once applied the paint will last for many years and after opening will last for at least 2 years in the bottle.Please note: We are not allowed to sell butane or solvent based products to persons under the age of 18.

SHAKE WELL before use.

Rated 5 out of 5 by from Very effective product. I used this to repair many tracks completely destroyed by battery acid leakage in a radio. Excellent coverage and conductivity. You will need a very fine paint brush to be able to paint track lines , however, and a steady hand. I initially tried to make a nib from a mitred ear bud shaft, but it just blobbed out. You might be able to adapt something else but a fine brush is probably best. I would be great if supplied with a tiny brush attached to the screw-on cap to save you having to try to source a brush. Still, does the job very satisfactorily.
Date published: 2014-11-11
Rated 5 out of 5 by from A very good product If repairing a rear heated screen mask up as close as you can to the existing elements, then shake the bottle very well. The first coat is very thin as it is being painted on glass don't try to put to much on in one coat, give 30 mins between coats, I put on a total of three coats which then gave a solid appearance. I have an estate car with an opening separately window which had rubbed through all the elements, on carefully applying this product ALL the elements no fully work again.
Date published: 2015-01-07
Rated 5 out of 5 by from I repaired all window heatings with this product. That is one year ago, since then works perfect.
Date published: 2014-11-11
Rated 5 out of 5 by from Does what is required Bought this on recommendation from another review from another site . The other product was first on the list as it had been around for years but according to the reviews not stood the test of time . This " paint " did exactly what was required, fixed the broken element in the rear heated glass on the wife's car first time . So for an investment of £9.99 saved £415.00 and a lot of hassle who could ask for more . Would DEFINITELY recommend to anyone wanting to repair heating elements in rear screens.
Date published: 2016-08-27
Rated 5 out of 5 by from It actually works! I used this to fix 5 broken rear demister elements on my daughter's car and it worked fine. I think you need to be patient and apply several layers of paint to get a good low resistance bridge. The breaks I had were small, about 1mm or so. And having cleaned the area thoroughly with Isopropyl Alcohol, I used masking tape to make a narrow strip, and a fine brush to apply about 7 or 8 layers to a 2cm strip across the break. The first couple of coats looked quite watery, almost transparent. But with more layers it ended up as solid silver line. I left it to dry and harden overnight before testing. Not sure how suitable it is for larger breaks. The resistance may be too high and so create a hot-spot compared with the rest of the element. But for me it worked fine. Pleasantly surprised.
Date published: 2016-10-28
Rated 5 out of 5 by from Repairs remotes! I used this to repair a very old Sony remote control. Paint it on the black carbon dots on the rubbery membrane - use at least three coats and shake it well before use and during use as the silver particles seperate quickly. The more coats used the more conductive it becomes. Clean the dots first - acetone (nail varnish remover) or meths both work and evaporate quickly. The hardest part was getting the remote apart! Very pleased with result and hardly used any of phial.
Date published: 2015-09-01
Rated 5 out of 5 by from Worked like a dream to repair TV remote control buttons Bought this stuff in the Plymouth store to repair non-working TV remote control buttons comprising rubber (carbon pad) buttons which had low conduction due to wear. Remove the rubber keypad and put a dot of this silver paint on with a fine brush, let it dry, reassembled, job done.
Date published: 2015-06-03
Rated 1 out of 5 by from Rear car demisters I tried to repair rear car demisters. Product is too thin and does not adhere. Waste of time and effort and of course your cash.
Date published: 2015-01-05
  • y_2018, m_3, d_17, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_GB, sid_N36BA, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_maplin-en_gb

what solvents do this product dissolve in? say if you wanted to make it thinner?

Asked by: Jack
Unfortunately, we are unable to advise as this is not the manner for which it was designed to be used.
Answered by: Dominic
Date published: 2017-10-12

Is this silver paint non tarnishing.

Asked by: kubusas999
Silver will tarnish over time.
Answered by: Dominic
Date published: 2017-07-11

does this paint amalgamate with Mercury, if so, at what rate (weight/time)

Asked by: chiptdigit
This is not listed as a feature or use of the product.
Answered by: Dominic
Date published: 2017-07-07

How many ml of product is this?

Asked by: Mimz
because of the density/viscosity of the product no cc measurement is provided, as stated in the description the bottle contains 3g of product,
Answered by: Les
Date published: 2017-01-30

Could this be used to repair a cars rear demister track?

Asked by: Stuart
I would say yes as its included in the items descriptions "repairing demisters on car rear windows"
Answered by: Dominic
Date published: 2017-01-18

What can I use to clean the brush after using this product, and also to remove overpainting or spillages? The enclosed instructions have a few dumbed-down pictograms so aren't much use.

Asked by: clayt_d
The brush would be sunk back into the paint, or if it required cleaning, you could use white spirits.
Answered by: Russell
Date published: 2016-12-29

I need some electrically conductive adhesive to repair battery terminals that have become detached from a thermoplastic housing - so I can't use solder. Do you think your Conductive Silver Paint might do?

Asked by: Eric
Unfortunately we are unable to guarantee full compatibility for this item in your intended application I am sorry for any inconvenience this may cause you.
Answered by: Darren
Date published: 2016-12-28

Can it be used as a conductive glue?

Asked by: AlAl
Unfortunately we are unable to guarantee full compatibility for this item in your particular use
Answered by: Dale
Date published: 2016-12-26
  • y_2018, m_3, d_17, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_en_GB, sid_N36BA, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb