Electro-Fashion Flash Controller with Two Sewable LEDs

£4.79

Our delivery options

Free standard delivery (orders over £10)
3-5 working days 9am-5pm
FREE
Standard delivery (orders under £10)
3-5 working days 9am-5pm
£2.99
Next day delivery
Mon - Fri, order by 6pm
From £5.99
Specific day/time delivery
Choose am / pm OR before 9am / 10.30am
From £5.99
 
 
 

Specific options for this product are available in the checkout. Read more delivery information

About this product

Overview

  • Basic kit to make a wearable flashing LED project
  • Perfect starter wearables or e-textiles kit
  • The entire kit is connected using purely conductive thread

Product overview

• Basic kit to make a wearable flashing LED project
• Perfect starter wearables or e-textiles kit
• The entire kit is connected using purely conductive thread
• Needle and scissors required

What can you do with the flash controller?
With this Electro-Fashion flash controller kit, you’re provided with all the pieces needed to sew your own LED e-textiles or wearables project. Using a specially made conductive thread, you can connect the sewable LEDs to the marked terminals on the flash controller. After sewing, insert the battery and you’re ready to go.

The flash controller itself will allow three different patterns for the LEDs: all on, slow flash on all, or fast flash in sequence. This unit will also auto turn off after 30 minutes to conserve battery life.

Sewing needle and scissors are required.

Caution:
The coin cell holders contain nickel and should not be used in designs where it will have prolonged contact with skin.

Specification

Specifications:
Dimensions:
Flasher unit (W x D x H) 20 mm x 34 mm x 9 mm
Ultra-slim LED (W x D x H) 6.5 mm x 15 mm x 2.7 mm
CR2032 Battery Height: 3.2 mm
CR2032 Battery Diameter: 10 mm
Package Contents Flash controller
2x sewable white LEDs
CR2032 coin cell battery holder
CR2032 coin cell battery
2m conductive thread (approx.)

Downloads