Energenie Pi-mote Control Board 433 MHz

Price match guranteePrice match guarantee

We can price match this item if found elsewhere. Call us on:

0333 400 9500

Quoting product code: A85RL

£5.99

About this product

Overview

Product overview

• A breakout board that provides RF connectivity to Raspberry Pi
• Connects wirelessly over 30m
• Works through walls and ceilings
• Compatible with Pi-mote RF sockets
• Switch off electric devices from afar and save electricity
• Compatible with Raspberry Pi models with 26 pins or above

What functionality does the Pi-mote control board add to my Raspberry Pi?
The 433 MHz radio antenna inside the Energenie Pi-mote control board gives wireless capabilities to your Raspberry Pi. This Raspberry Pi breakout board is designed to be used in conjunction with Pi-mote RF sockets, which can be found here.

With a range of 30m through walls and ceilings, you can control the electrical power switches throughout a property from a single Raspberry Pi.

What could I achieve with the Pi-mote control board?
The possibilities are numerous when adding real-world, interactive capabilities to your Raspberry Pi. Whether you are newcomer or a seasoned hardware hacker, you can really take advantage of the increased control of your power usage.

Most simply, this could be used as a solution to grant access to power sockets that are difficult to gain access to – an essential for people with mobility issues.
Studies have shown that 10 per cent of electric costs occur as a result of needlessly leaving peripherals on overnight, but with the Pi-mote, the extra cost of your bill could be put to better use.

What is compatible with the Pi-mote control board?
The Pi-mote control board has 26 pin sockets and is compatible with any Raspberry Pi models that use a 26 pin or 40 pin GPIO. For the 40 pin models, however, a number of the remaining pins will be inaccessible.

The Pi-mote board is also compatible with all of the 433 MHz Pi-mote remote control sockets.

Specification

Specifications
Type of devices RF piggyback board for the Raspberry Pi (Tx only)
Compatible with which Pi's? Yes all
Pin outs Pins: 1, 2, 6, 11, 13, 15, 16, 18, 22
Sockets GPIO
Voltage 3.3 V from Raspberry Pi
Current 1 A minimum
Switching current N/A
Assembly required No
Soldering required No
Package Contents
Single ENER314 packed in an antistatic bag

Can this receive data - from a wireless temp sensor for example?

Asked by: bitsubatsu
Full details about the item can be found at the link below: https://www.pi-supply.com/product/energenie-pi-mote-control-board/?v=79cba1185463
Answered by: Dominic
Date published: 2016-01-18

Can this be plugged onto a Raspberry Pi 2?

Asked by: MStewart999
I am pleased to advise the product you mentioned will do exactly what you require.
Answered by: Dominic
Date published: 2015-11-04

Is this compatible with LightwaveRF?

Asked by: Tinkerer
I am sorry but the item in question does not support use in your intended application.
Answered by: Russell
Date published: 2015-10-21
  • y_2017, m_10, d_22, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_GB, sid_A85RL, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_maplin-en_gb

Downloads